M.A. Ford
M.A. Ford 14012500C Tuffcut GP 4 Flute Ball Nose End Mill 1/8 pneumatic accessory
A 1/8 inch four-flute ball nose end mill for contour milling in pneumatic tools
- 4-flute design for efficient material removal
- Ball nose profile enables 3D contouring and profiling
- 1/8 inch diameter for precision machining tasks
- Tuffcut GP series built for general-purpose milling
- California Proposition 65 warning for chemical safety awareness
TuffCut GP 4-flute ball-nose end mill
This M.A. Ford 14012500C cutter is a solid-carbide end mill with a 1/8-inch ball nose and four flutes. It is designed for general-purpose profiling, contouring and slotting in a range of ferrous and non-ferrous materials. Machinists and maintenance technicians use it on CNC mills and manual machines where a versatile, ready-to-cut tool is required. It is not suited for buyers who need a larger diameter or a different flute count for their specific application.
Thermals noise and power draw
As a passive cutting tool, the end mill generates no operational noise, draws no electrical power and has no internal thermal characteristics of its own. Heat and vibration during use depend entirely on the machine spindle, the workpiece material, the cutting parameters selected and the coolant strategy employed by the operator. The tool itself adds no acoustic or thermal load to the workshop environment beyond the cutting process it performs.
California Proposition 65 notices
The manufacturer advises that this product contains a chemical known to the State of California to cause cancer and a chemical known to cause birth defects or other reproductive harm. These regulatory notices are included with the tool and do not alter its cutting geometry, coating or dimensional specifications. No additional accessories, software or documentation are bundled that change the way the end mill is installed or used in a standard tool holder.
Highlights
- 4-flute design for efficient material removal
- Ball nose profile enables 3D contouring and profiling
- 1/8 inch diameter for precision machining tasks
- Tuffcut GP series built for general-purpose milling
- California Proposition 65 warning for chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 1/8 ball nose end mill in my pneumatic tool, and what step causes runout?
Secure the 1/8 shank fully in a matching collet and tighten evenly; the step that causes runout is leaving a gap between the shank shoulder and the collet face.
What maintenance or replacement will the 14012500C end mill need after extended cutting?
The four flutes dull with use; replace the cutter when edge wear exceeds your finish tolerance or when chip evacuation degrades in the material you are machining.
What limit appears first on the 14012500C during sustained high-speed milling?
Heat buildup at the ball nose cutting edges is the first limit; it accelerates flute wear and can degrade surface finish before the tool shank or collet reaches a mechanical limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
