M.A. Ford
M.A. Ford 13562905N3 Tuffcut Al 2 Flute End Mill Necked 16.0Mm statue
A 16.0 mm necked two-flute end mill for aluminium, identified by part number 13562905N3
- TypeCutting Tools
- TuffCut AL geometry cuts aluminium cleanly
- Two-flute design clears chips efficiently from slots
- Necked shank reaches deep cavities without interference
- 0 mm cutting diameter suits medium milling tasks
- California Proposition 65 warning discloses regulated chemicals
TuffCut AL 16.0 mm Necked End Mill
The M.A. Ford 13562905N3 is a two-flute carbide end mill necked for extended reach in aluminium and non-ferrous materials. It serves CNC programmers and machinists who need clearance for deep pockets or tall walls without switching to a longer overall tool. The necked geometry reduces deflection compared with a standard long-flute cutter of the same diameter. California Proposition 65 warnings apply to this product.
Sustained aluminium profiling performance
Under continuous cuts the polished flutes evacuate chips efficiently and resist built-up edge, keeping cutting forces stable over long tool paths. The necked shank maintains rigidity where a plain long flute would chatter, so surface finish stays consistent from the first pass to the final depth. Heat concentrates in the short flute length rather than conducting into the holder, preserving dimensional accuracy during extended runs.
Upgrade from standard long-flute cutters
Shops replacing a conventional 16.0 mm long-flute tool gain reach without the vibration penalty that forces lower feed rates. The step is worthwhile when part geometry demands clearance past fixtures or deep cavity walls that a standard flute length cannot reach. It does not suit hardened steels or high-temperature alloys where a dedicated geometry and coating are required.
Highlights
- TuffCut AL geometry cuts aluminium cleanly
- Two-flute design clears chips efficiently from slots
- Necked shank reaches deep cavities without interference
- 0 mm cutting diameter suits medium milling tasks
- California Proposition 65 warning discloses regulated chemicals
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
Does the 16.0 mm necked end mill generate noticeable heat or noise during extended milling runs?
The M.A. Ford Tuffcut Al 2-flute end mill is a solid carbide cutting tool with no moving parts, so it produces no mechanical noise; heat generated depends on your spindle speed, feed rate and coolant strategy rather than the tool itself.
What machine setup is required before the 13562905N3 can be used?
You need a milling machine or CNC router with a 16.0 mm tool holder or collet, appropriate spindle power for aluminium, and a coolant or mist system to manage chips and temperature.
Will this 2-flute necked cutter work alongside older carbide tooling in the same job?
Yes — it shares standard shank dimensions and cutting geometry conventions, so it can be swapped with existing carbide end mills in the same tool library without changing holders or post-processor settings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
