M.A. Ford
M.A. Ford 13562901N5 End Mill 16.0 mm
A 16.0 mm necked, two-flute end mill designed for aluminium cutting tasks
- TypeCutting Tools
- 0 mm necked design reaches deep cavities
- Two-flute geometry clears chips in aluminium
- M.A. Ford TuffCut Al coating resists built-up edge
- New condition delivers full factory performance
- Prop 65 notice informs safe handling practice
16.0 mm Necked End Mill for Aluminium
The M.A. Ford 13562901N5 is a two-flute necked end mill designed for aluminium machining. Its 16.0 mm cutting diameter suits profiling and pocketing operations where reach and chip evacuation matter. Machinists and CNC operators working with non-ferrous alloys will find the geometry optimised for those materials. This tool is not intended for hardened steels or high-temperature alloys.
Two-Flute Geometry and Chip Clearance
A two-flute design provides large gullets that move aluminium chips away from the cut quickly. The necked shank allows deeper reach without the shank contacting the workpiece wall. Feed rates must stay within the tool’s material-specific limits to avoid deflection or breakage. The uncoated carbide substrate relies on sharp edges rather than a coating for lubricity.
Prop 65 Warning and Toolholder Fit
California Proposition 65 notices indicate the product contains chemicals linked to cancer and reproductive harm; handle with appropriate personal protection and ventilation. Verify that your toolholder accepts a 16.0 mm shank and that the machine spindle can accommodate the overall length. Confirm the workpiece material matches the aluminium-specific geometry before ordering. Buyers needing a different diameter or flute count should select another model.
Highlights
- 0 mm necked design reaches deep cavities
- Two-flute geometry clears chips in aluminium
- M.A. Ford TuffCut Al coating resists built-up edge
- New condition delivers full factory performance
- Prop 65 notice informs safe handling practice
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
Is the 16.0 mm necked end mill the right diameter for my job?
The 16.0 mm cutting diameter suits pockets and profiles that need that exact width; choose it when your drawing calls for a 16 mm slot or finish pass.
What does the 2-flute TuffCut AL geometry do in aluminium?
Two flutes give large chip gullets for fast evacuation in soft alloys, reducing built-up edge and leaving a cleaner wall finish.
How does the necked shank affect reach and rigidity?
The reduced neck clears deep walls without shank interference while the solid carbide body keeps deflection low at full 16.0 mm engagement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
