M.A. Ford
M.A. Ford 13539370 End Mill 10.0Mm
Two-flute TuffCut AL end mill, 10.0 mm diameter, for aluminium cutting
- TypeCutting Tools
- 2-flute design enables efficient aluminium cutting
- 0 mm diameter suits precise milling tasks
- TuffCut Al series built for non-ferrous materials
- New condition ensures full factory performance
- California Proposition 65 warning for chemical safety awareness
Cutting tool for aluminium
The M.A. Ford 13539370 is a 10.0 mm two-flute end mill designed for aluminium machining. It suits workshops and fabricators who need reliable material removal in non-ferrous metals. The TuffCut AL geometry supports efficient chip evacuation during high-speed operations. This new cutting tool arrives ready for use in milling machines and CNC routers.
Upgrade from general-purpose cutters
Switching from a standard multi-flute tool reduces chip packing and heat build-up in aluminium. The two-flute design clears swarf faster, letting you raise feed rates without re-cutting chips. The improvement pays off when cycle time or surface finish on non-ferrous parts becomes a bottleneck. Orders of $75 or more ship free from the manufacturer.
Check holder and machine suitability
Verify that your tool holder accepts a 10.0 mm shank and that the machine spindle provides the speed range recommended for aluminium. Confirm the workpiece material matches the cutter’s intended application to avoid premature wear. California Proposition 65 warnings apply because the product contains listed chemicals.
Highlights
- 2-flute design enables efficient aluminium cutting
- 0 mm diameter suits precise milling tasks
- TuffCut Al series built for non-ferrous materials
- New condition ensures full factory performance
- California Proposition 65 warning for chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|---|
| Type | Cutting Tools |
Questions about this item
What shank diameter does the 10.0 mm Tuffcut Al end mill need in a collet or holder?
The cutter has a 10.0 mm cutting diameter, so it requires a 10.0 mm shank-compatible collet or shrink-fit holder for secure clamping.
How do I install the 2-flute end mill without causing run-out?
Clean the shank and collet faces, insert the tool to the recommended depth, and tighten the collet nut evenly with a torque wrench; uneven tightening is the step most often done incorrectly.
When should I replace the M.A. Ford 13539370 end mill?
Replace it when flank wear reaches the manufacturer’s limit, when chipping appears on the cutting edges, or when surface finish on aluminium degrades beyond tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
