M.A. Ford
M.A. Ford 1070AP Cyclone XD Coolant-Fed Double Margin Drill 10.70 mm
Coolant-fed double-margin drill delivers precise 10.70 mm holes with improved chip evacuation
- 70 mm diameter drills precise holes in metal
- Double margin design keeps the drill centred for straighter cuts
- Coolant-fed channels deliver fluid to the tip for longer tool life
- Cyclone XD geometry removes chips efficiently at 3X feed rates
- New M.A. Ford drill ready for immediate workshop use
10.70 mm Coolant-Fed Drill
The M.A. Ford 1070AP Cyclone XD is a double margin drill designed for precision holemaking in demanding materials. Coolant-fed operation delivers fluid directly to the cutting zone for temperature control and chip evacuation. It targets machinists and maintenance teams producing accurate 10.70 mm bores in tough alloys.
Upgrade from standard twist drills
Conventional drills without through-coolant or double margins struggle with deep holes in stainless steels and high-temperature alloys. This tool adds internal coolant delivery and a second guiding margin to improve straightness and surface finish. The jump is justified when hole quality or tool life on difficult materials falls short of requirements.
Handles 3× diameter depths in tough alloys
The 3X length design comfortably reaches depths up to three times the 10.70 mm diameter while maintaining coolant pressure. Double margins stabilise the drill through cross-holes and interrupted cuts. It runs out when hole depths exceed the flute length or when machine rigidity cannot support the required feed forces.
Highlights
- 70 mm diameter drills precise holes in metal
- Double margin design keeps the drill centred for straighter cuts
- Coolant-fed channels deliver fluid to the tip for longer tool life
- Cyclone XD geometry removes chips efficiently at 3X feed rates
- New M.A. Ford drill ready for immediate workshop use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What spindle size and coolant-pressure rating does the 10.70 mm Cyclone XD drill require for secure mounting?
The drill has a 10.70 mm cutting diameter and is designed for coolant-fed operation; match your machine spindle to that shank size and supply coolant at the pressure your tool-holder manufacturer specifies for 3×D drilling.
Which step is most often missed when installing the double-margin 1070AP drill in a CNC holder?
Operators frequently forget to engage the coolant-through channel before tightening the collet, so verify coolant flow through the drill body before starting the spindle.
How often should the double margins on the 10.70 mm Cyclone XD be inspected for wear?
Inspect both margins at every tool change or after each 1070 mm of axial feed; replace the drill once margin land width drops below the minimum recommended by your tool-management program.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
