LZSIG LMIX1 4-Channel Audio Mixer 4 IN 1 OUT
Compact four-channel line mixer combines multiple instruments or playback devices into one stereo or mono output with ultra-low-noise op-amps and switchable 3.5 mm or 6.35 mm jacks
- Specification, LZSIG, , , , Count, 4, 1/4-Inch/6.35mm 1/8-Inch/3.5mm, , L
- Power SupplyCorded Electric
- Dimension3.14 L x 5.39 W x 1.77 H inches
- Mix up to four sources into one output with four independent channels
- Clean, distortion-free signal from ultra-low-noise op-amps and power management
- Switch between mono and stereo modes without needing cable adapters
- Flexible 5 V DC power works with standard supplies or power banks
- Compact 3.14 × 5.39 × 1.77 inch chassis weighs just 0.322 kg
Compact 4-Channel Line Mixer
The LZSIG LMIX1 accepts up to four line-level sources such as electronic drums, keyboards, guitars, computers or gaming consoles and combines them into a single stereo or mono output. It is built for musicians, streamers and home-studio owners who need a small footprint mixer to expand an existing audio chain without a full-size console.
DC 5V Power and Dual Jack Flexibility
A 5 V corded-electric supply — sold separately — powers the unit from a CE- or UL-certified adapter, power strip or power bank, freeing the mixer from fixed wall outlets. Each channel offers a mono/stereo switch and independent volume control, while both 6.35 mm and 3.5 mm TRS/TS cables plug directly into the inputs and output with no adapters required.
Ultra-Low-Noise Sustained Operation
Six ROHM low-noise op-amps and an MPS power-management chip work together to suppress ground hum and distortion during long sessions. The manufacturer advises setting input and output volumes at 70 % or above for the cleanest signal path, and positioning the mixer away from other electronics to maintain low-noise performance over extended use.
Highlights
- Mix up to four sources into one output with four independent channels
- Clean, distortion-free signal from ultra-low-noise op-amps and power management
- Switch between mono and stereo modes without needing cable adapters
- Flexible 5 V DC power works with standard supplies or power banks
- Compact 3.14 × 5.39 × 1.77 inch chassis weighs just 0.322 kg
Specifications
| Brand | LZSIG |
|---|---|
| Part Number | LMIX1 |
| Specification | , LZSIG, , , , Count, 4, 1/4-Inch/6.35mm 1/8-Inch/3.5mm, , LMIX1, , 52161500, xisier Electronic Technology, Small(4-channel), , 3.14 L x 5.39 W x 1.77 H inches, 1, Corded Electric, false, false, 4, 0.322 kilograms, 1 year manufacturer., 1, , Auxiliary, , 3.14 inches, 5.39 inches, 1.77 inches, 6.096 L x 8.9916 W x 16.3068 H centimeters, 2021-05-28T15:21:31.388Z, not_applicable, |
| Power Supply | Corded Electric |
| Dimension | 3.14 L x 5.39 W x 1.77 H inches |
Questions about this item
What is the first limitation you hit when running all four channels at high gain for long sessions?
The unit draws power from an external DC 5 V supply that must be CE- or UL-certified; an undersized adapter will cause drop-outs or added noise before the mixer itself reaches any internal limit.
How much heat or fan noise does the LMIX1 produce after hours of continuous operation?
There is no fan and the all-analogue circuitry stays barely warm; the only audible artefact is the ultra-low noise floor maintained by the six ROHM op-amps and the MPS power-management chip.
Which cables and power source must I already have to connect four stereo instruments and get sound out?
You need four 3.5 mm or 6.35 mm TRS/TS cables for the inputs, one matching cable for the output, and a separate DC 5 V power adapter or power bank — none are included in the box.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



