We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack-mount switch with 10 RJ45 ports, 2 SFP slots, front LEDs

Luxul

Luxul AMS-1208P 12-Port 8 PoE+ Gigabit Managed Network Switch

SKU CH-PHTE-6J25M MPN AMS-1208P

A managed Gigabit switch with twelve ports, eight PoE+ ports sharing a 130 Watt budget, two SFP uplinks, Layer 3 static routing, VLAN and QoS support, in a fanless 19-inch rack-mount chassis

  • StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802
  • Network Management TypeManaged
  • Primary Ports10 x RJ45 + 2 x SFP
  • Primary Port Speed10/100/1000Mbps
  • PowerInternal Switched Power, AC 100-240V, 50-60Hz input 130 Watt
  • Dimensions1.75" x 8.25" x 17.3" (H x W x L)
  • Managed control with Layer 3 static routing and VLAN support
  • 8 PoE+ ports deliver up to 130 W for access points and cameras
  • 10 Gigabit RJ45 plus 2 SFP uplinks handle heavy traffic
  • Fanless design runs silently in offices or racks
  • 1U 19-inch rack-mount fits standard cabinets

12-Port Managed Switch for PoE Networks

The Luxul AMS-1208P provides twelve gigabit ports with eight supporting PoE+ for powering access points, cameras or VoIP phones. Two SFP uplinks allow fibre connections to a core switch. Layer 3 static routing and 802.1Q VLANs suit small business or AV installations needing segmented traffic.

Sustained Load Behaviour with Fanless Design

A 24 Gbps switching capacity handles full wire-speed forwarding across all ports without blocking. The 130 watt PoE budget is shared across the eight powered ports, so total draw remains constant under continuous operation. Fanless cooling relies on convection within the 0°C to 40°C operating range, eliminating moving-part wear during 24/7 duty cycles.

Rack Mount Installation and Common Issues

The included 19-inch rack kit fits standard cabinets using the supplied screws. Plug-and-play defaults pass traffic immediately, while the web interface enables VLAN, QoS and static route configuration. Installers should verify the aggregate PoE load stays within the 130 watt budget and confirm SFP modules match the required fibre type before deployment.

Highlights

  • Managed control with Layer 3 static routing and VLAN support
  • 8 PoE+ ports deliver up to 130 W for access points and cameras
  • 10 Gigabit RJ45 plus 2 SFP uplinks handle heavy traffic
  • Fanless design runs silently in offices or racks
  • 1U 19-inch rack-mount fits standard cabinets

Specifications

BrandLuxul
ModelAMS-1208P
StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3af, IEEE 802.1D, IEEE 802.3x
Network Management TypeManaged
Primary Ports10 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
PowerInternal Switched Power, AC 100-240V, 50-60Hz input
130 Watts Maximum
Dimensions1.75" x 8.25" x 17.3" (H x W x L)
Temperature0°C to 40°C (32°F to 104°F)
Humidity10% - 90%, Non-condensing
Features10 Gigabit RJ45 Ports
2 Gigabit SFP ports
8 Ports Support 802.3af/at PoE+ with 130 Watt Power Budget
24Gbps Switching Capacity
Layer 3 Static Routing
802.1Q VLAN (with Trunking) and QoS Support
Plug-and-Play Installation with Intuitive Management
Simple Power Management of PoE-Enabled Devices
User Selectable Green or Blue Front facing LEDs
Fanless for Silent Operations
Standard 19” Rack-Mount
Package ContentsOne: 12-port Gigabit Managed PoE+ Switch
One: Power Cord
One: Rack Mount Kit
One: Quick Install Guide
Shipping weight1.13 kg
Package size439 × 210 × 44 mm

Questions about this item

How loud is the AMS-1208P when running continuously in a quiet room?

The switch is fanless, so it operates silently with no moving parts to generate noise.

What cabling and modules do I need to use all 10 RJ45 and 2 SFP ports?

You need Cat5e or better Ethernet cables for the RJ45 ports and compatible 1 Gbps SFP transceivers with fibre patch cords for the SFP slots.

Can I keep my older 10/100 Mbps devices on this switch without slowing the Gigabit ports?

Yes, each of the 10 RJ45 ports auto-negotiates to 10, 100 or 1000 Mbps, so legacy devices connect at their rated speed while Gigabit devices run at full speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.