We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with one HDMI input and eight HDMI outputs

LUOM

LUOM YME-098 8x1 HDMI Monitor Splitter 1in-8out 4K 30Hz Black

SKU CH-MXG0-5TAJ0

Splits one HDMI source to eight displays at up to 3840 x 2160 resolution and 30 Hz

  • TypeHDMI Splitters
  • Changer TypeHDMI Switch/Extender
  • Ports8
  • ColorBlack
  • Cable Length5 in.
  • Input Connector1x HDMI female
  • One source drives eight displays simultaneously
  • 4K resolution at 30 Hz for sharp detail
  • 2 Gbps bandwidth handles high-speed signals
  • 48-bit deep colour with extended colour-space support
  • Dolby TrueHD and DTS-HD Master Audio pass-through

1-in-8 HDMI splitter for multi-display setups

The LUOM YME-098 takes a single HDMI source and duplicates the signal across eight HDMI displays simultaneously. It supports video formats up to 3840 x 2160 at 25 or 30Hz, alongside 1080p, 720p, 480p and 576p resolutions. Audio passthrough covers DTS-HD Master Audio, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC3 and DSD. The unit is suited for digital signage, conference rooms, classrooms or any installation needing one source shown on many screens.

Placement and cabling considerations

The splitter requires an external power supply (not detailed in the data) and sits between the source device and up to eight displays. With AWG26 standard HDMI cables the total run from input to outputs can reach 130 ft, letting you locate screens farther from the source. It also regenerates the HDMI signal, which helps maintain integrity over longer cable lengths. No software or driver installation is needed on the host device.

Passive thermal design and power profile

The aluminium enclosure dissipates heat without a fan, so operation is silent in normal use. Power draw is low because the device only buffers and re-clocks the 10.2 Gbps HDMI 1.4 stream; no heavy processing or scaling occurs. The 5-inch pigtail cable keeps the main body close to the source or distribution point, reducing strain on the HDMI ports.

Highlights

  • One source drives eight displays simultaneously
  • 4K resolution at 30 Hz for sharp detail
  • 2 Gbps bandwidth handles high-speed signals
  • 48-bit deep colour with extended colour-space support
  • Dolby TrueHD and DTS-HD Master Audio pass-through

Specifications

BrandLUOM
ModelYME-098
TypeHDMI Splitters
Changer TypeHDMI Switch/Extender
Ports8
ColorBlack
Cable Length5 in.
Input Connector1x HDMI female
Output Connector8x HDMI female
Connector StyleStandard
Maximum Resolutions3840 x 2160

Questions about this item

Does the 10.2 Gbps bandwidth limit the 4K output to 30 Hz?

Yes, the splitter supports 3840 x 2160 at 25 or 30 Hz over its 10.2 Gbps link, so 4K 60 Hz is not possible.

Will the unit get hot or noisy when driving eight displays continuously?

The device has no fan and draws little power, so it runs silently and stays cool during all‑day operation.

What cables and power source do I need before it will work?

You need one HDMI source cable, up to eight HDMI display cables, and a USB power adapter for the included micro‑USB port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.