We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LUOM

LUOM KW208 Professional 12V 100-2000 CCA Automotive Load Battery Tester Bad Cell Test Car Boat Motorcycle

SKU CH-EPRA-YJ1HF MPN KW208

Tests 12V batteries from 100 to 2000 CCA, checks cranking and charging systems, and identifies bad cells on cars, boats and motorcycles

  • Size/Dimensions5.98 x 3.39 x 1.77 inches
  • DC Voltage12V
  • Analog/DigitalDigital
  • DC Polarity IndicatorYes
  • Color/FinishBlack
  • Item Count1*KONNWEI KW208 Auto Diagnostic Scanner 1*User’s Manual 1*On
  • Tests 12V batteries from 100 to 2000 CCA without removal
  • Analyses flooded, AGM flat plate, AGM spiral and gel types
  • Shows health, charge, cranking and alternator data in seconds
  • Delivers 99.9% accuracy via STM-32 chip with replace or recharge advice
  • Includes reverse-polarity protection and UL/CSA certification

12V 100-2000 CCA Load Tester

The LUOM KW208 is a digital battery analyser built for 12 V lead-acid units rated from 100 to 2000 CCA. It suits professional technicians and serious DIY owners who need quick health, cranking and charging checks on cars, motorcycles, boats and commercial vehicles without removing the battery.

Thermals Noise and Power Draw

The tester draws its operating power directly from the battery under test, so it adds no separate load to a workshop supply. Maximum input and output currents are 15 A, and the specified noise level spans -10 to +56 dB during normal operation.

Bad-Cell Detection and Multi-Standard Support

The decisive feature is the ability to pinpoint a bad cell directly while reporting SOH, SOC, CCA value and internal resistance against CCA, BCI, CA, MCA, JIS, DIN, IEC, EN and SAE standards. Buyers who need wireless logging or lithium-battery support should look elsewhere.

Highlights

  • Tests 12V batteries from 100 to 2000 CCA without removal
  • Analyses flooded, AGM flat plate, AGM spiral and gel types
  • Shows health, charge, cranking and alternator data in seconds
  • Delivers 99.9% accuracy via STM-32 chip with replace or recharge advice
  • Includes reverse-polarity protection and UL/CSA certification

Specifications

BrandKonnwei
ModelKW208
Size/Dimensions5.98 x 3.39 x 1.77 inches
DC Voltage12V
Analog/DigitalDigital
DC Polarity IndicatorYes
Color/FinishBlack
Item Count1*KONNWEI KW208 Auto Diagnostic Scanner
1*User’s Manual
1*One Year Worry-free guarantee
Energy Star QualifiedEnergy Star Qualified
Selling UnitSet
TypeBattery Tester
FeaturesKONNWEI KW208 12V Car Battery Tester, 100-2000 CCA Load Tester Automotive Alternator Tester Digital Auto Battery Analyzer Charging Cranking System Tester for Car Truck Marine Motorcycle SUV Boat
Maximum Input Current15A
Maximum Output Current15A
Maximum Ohms1M Ohms
Noise Level-10 to +56 dB
Accuracy±6mm
Standards/CertificationsUL/CSA
Battery TypeAAA battery
Commercial/ResidentialCommercial

Questions about this item

How do I connect the KW208 clips to a 12V battery for an in-vehicle test?

Attach the red clip to the positive terminal and the black clip to the negative terminal; the tester powers on automatically and runs the selected test without removing the battery.

Which user-replaceable power cells does the KW208 require when the internal supply runs low?

The unit operates on standard AAA batteries that can be swapped out when depleted.

At what CCA rating does the KW208 reach its measurement ceiling during repeated load tests?

The tester supports battery ratings up to 2000 CCA; values above that limit fall outside its specified range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.