LUOM DP28 DisplayPort 1.4 Cable 3.3ft 32.4Gbps 8K@60Hz 4K@144Hz 2K@240Hz HBR3 DSC 1.2 HDCP 2.2 HDR Black
- DisplayPort
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
LUOM
A VESA-certified DisplayPort 1.4 cable delivering 32.4 Gbps bandwidth for 8K at 60 Hz, 4K at 144 Hz or 2K at 240 Hz with HDR and HDCP 2.2 support
This one-metre VESA-certified DisplayPort 1.4 cable carries up to 32.4 Gbps bandwidth. It supports 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz for high-refresh gaming or professional colour work. Backward compatible with DisplayPort 1.3 and 1.2. Male-to-male connectors in grey.
The cable handles 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz and 1080P@240Hz with HDR10, HDCP 2.2 and 1.4. DSC 1.2 compression and FEC forward error correction keep the signal clean. Multi-Stream Transport allows daisy-chained monitors from a single port. 32 audio channels and BT.601, BT.709, BT.2020, Adobe RGB colour spaces are supported.
Plug each male connector into a DisplayPort 1.4 source and display; no drivers or software are required. The 28 AWG tinned-copper conductors are flexible but should not be bent sharply near the plugs. Ensure both devices run DisplayPort 1.4 firmware to unlock 8K@60Hz or 4K@144Hz; older ports will fall back to their maximum rated mode. Not suited for buyers needing longer runs or angled connectors.
| Brand | LUOM |
|---|---|
| Model | DP28 |
| Type | DisplayPort |
| Color | Grey |
| Connector Number | 1 |
| Connect From | 1 x DisplayPort 1.4 |
| Connect To | 1 x DisplayPort 1.4 |
| Connector Detail | DisplayPort to DisplayPort( Male to Male) |
| Terminal Gender | Male to Male |
| Speed | Supports up to 32.4Gbps bandwidth. |
| Specifications | Bandwidth: 32.4Gbps Refresh Rate: 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz HDCP 2.2, HDCP 1.4, HDR.. Backward compatible with DisplayPort 1.3/1.2. Dynamic HDR, Multi-Screen Display Conductor Material : 28AWG Tinned Copper Supports BT601, BT709, BT2020, Adobe RGB Color Format |
| Refresh Rate | 8K@60Hz, 5K@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 2K@165Hz |
| Features | 8K DisplayPort Cable 1.4 4K 144Hz 2K 240Hz About Brand Silkland: [Officially Certified VESA Member] Supports 8K@60Hz, 2K@240Hz, 4K@144Hz, 4K@60Hz, 5K@60Hz, 2K@165Hz, 1080P@240Hz, HDCP 2.2/1.4 and HDR HBR3 Rated, supports transmission speed up to 32.4Gbps Display Stream Compression 1.2(DSC), FEC forward error correction, and 32 audio channels HBR3 rated - Backward compatible with DisplayPort 1.3/1.2/1.1 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 28AWG tinned copper conductors are built for durable daily use; normal insertion cycles do not require scheduled replacement of the cable itself.
The 32.4 Gbps HBR3 bandwidth ceiling is the first limit reached when driving 8K at 60 Hz or 4K at 144 Hz with full colour depth.
As a passive copper DisplayPort 1.4 cable it adds no active heat or power draw; the connectors remain at ambient temperature during continuous 4K 144 Hz use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?