LUOM
LUOM BNC AHD TVI CVI CVBS to HDMI Video Converter 1080p 60Hz
Converts TVI, CVI, AHD and CVBS security camera signals to 1080p 60Hz HDMI with simultaneous BNC loop output up to 700 metres over coax
- TypeTVI/CVI/AHD to HDMI Converter
- Connector AOne channel CVI/TVI/AHD/CVBS BNC input
- Connector BOne Channel CVI/TVI/AHD/CVBS BNC loop output;1x One channel
- Package Contents1x TVI/CVI/AHD to HDMI Converter 1x 5V/1A Power Adapter and
- Converts TVI, CVI, AHD and CVBS cameras to 1080p HDMI at 60 Hz
- BNC loop output passes 4K signals up to 700 m over coax
- Auto-detects 720p, 1080p, 3MP, 4MP, 5MP and 8MP resolutions
- Simultaneous HDMI and BNC outputs drive multiple monitors from one converter
- Plug-and-play design includes 5 V power adapter for immediate installation
Security Camera Signal Converter
This LUOM converter translates TVI, CVI, AHD and CVBS coaxial camera feeds into a 1080p 60Hz HDMI signal for direct monitor viewing. It accepts one BNC input and provides simultaneous HDMI and BNC loop outputs. The unit auto-detects resolutions from 720p up to 8MP across supported formats. It is built for installers and operators who need live high-definition display from existing analogue-HD cabling.
Pre-Installation Checklist
Verify that your cameras output TVI, CVI, AHD or CVBS over BNC and that the cable run does not exceed the 500-700 metre range quoted for the resolution in use. Ensure a 5V 1A power source is available for the included adapter. Confirm the target monitor or recorder has an HDMI input capable of 1080p at 60Hz. The device requires no drivers or software configuration.
Upgrade Path and Value
This converter replaces a dedicated DVR when only local live viewing is needed, eliminating recorder cost and complexity. It upgrades older CVBS-only monitors to handle 720p, 1080p and multi-megapixel analogue-HD formats without re-cabling. The jump is worth it for sites adding HD cameras to legacy coax infrastructure or for multi-monitor setups using the loop output for synchronous display.
Highlights
- Converts TVI, CVI, AHD and CVBS cameras to 1080p HDMI at 60 Hz
- BNC loop output passes 4K signals up to 700 m over coax
- Auto-detects 720p, 1080p, 3MP, 4MP, 5MP and 8MP resolutions
- Simultaneous HDMI and BNC outputs drive multiple monitors from one converter
- Plug-and-play design includes 5 V power adapter for immediate installation
Specifications
| Type | TVI/CVI/AHD to HDMI Converter |
|---|---|
| Connector A | One channel CVI/TVI/AHD/CVBS BNC input |
| Connector B | One Channel CVI/TVI/AHD/CVBS BNC loop output;1x One channel HDMI output |
| Package Contents | 1x TVI/CVI/AHD to HDMI Converter 1x 5V/1A Power Adapter and Cable 1x 1x User Manual |
Questions about this item
What comes in the box and do I need any extra cables?
The package includes the converter, a 5V/1A power adapter with cable, and a user manual. You will need to supply your own BNC coaxial cable for the camera input and an HDMI cable for the monitor output.
Which resolution should I select on the switch for my 1080p camera?
Set the switch to 1080p for a 1080p camera; the converter also auto-recognises 720p, 3MP, 4MP, 5MP, and 8MP signals from TVI or AHD sources, and 720p, 1080p, 4MP, 8MP from CVI sources.
What does the 1080p 60Hz HDMI output mean for my monitor?
The HDMI port delivers a 1080p picture at 60 frames per second, giving smooth live-view motion on any HDMI monitor or HDTV without scaling artefacts.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011497BTC
In stock
