Lumapro
Lumapro Low Bay Fixture 72in 24in 35W
A suspended low-bay fixture measuring 72 inches long by 24 inches wide, housing two F28T5 lamps at 35 watts each with a 120 to 277 VAC electronic ballast
- 72-inch length covers wide work areas
- 35W fluorescent tubes cut energy use vs older fixtures
- 120-277VAC input suits standard and industrial power
- cULus listing confirms safety compliance
- Suspended mounting keeps floor space clear
72 Inch Low Bay Fixture
The Lumapro low bay fixture spans 72 inches in length and 24 inches in width with a height of 3 9/64 inches. It operates on 120 to 277 VAC with an electronic ballast and a total fixture wattage of 70 watts. The housing uses 17 gauge metal with a white powder paint finish and carries cULus listing.
Indoor Overhead Lighting
This fixture suits warehouses, workshops or retail spaces needing suspended overhead illumination from two F28T5 lamps. Buyers who need aperture lenses, surface mounting or lamps included in the box should look at other models. The ambient range of 0 to 104 degrees Fahrenheit limits use in unheated cold storage or high heat zones.
Two Lamp F28T5 Configuration
The single specification that decides fit is the requirement for two F28T5 lamps at 35 watts each, which are not included. The suggested replacement lamp is item number 5AE23. Verify the lamp type and quantity match your lighting plan before ordering.
Highlights
- 72-inch length covers wide work areas
- 35W fluorescent tubes cut energy use vs older fixtures
- 120-277VAC input suits standard and industrial power
- cULus listing confirms safety compliance
- Suspended mounting keeps floor space clear
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
Which length and width suit a 72-inch by 24-inch low bay layout?
The fixture measures 72 inches long and 24 inches wide, matching a 6-foot by 2-foot mounting grid.
What does the 35-watt lamp rating mean for total power draw once installed?
Each of the two F28T5 lamps is 35 watts, so the fixture operates at 70 watts total under the single electronic ballast.
How does the 120-to-277-volt range affect wiring on a standard US circuit?
The electronic ballast accepts any voltage from 120 VAC to 277 VAC, allowing direct connection to common 120 V or 277 V branch circuits without rewiring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
