Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00940244BTC
In stock
Lumapro
Lumapro 1XUD6 70 W HID Ballast Kit
A 70 W HID ballast kit for one metal halide lamp with pulse start, 120 to 277 V AC input and -20 °F minimum starting temperature
- Pulse start enables reliable ignition in cold conditions down to -20°F
- Single-lamp kit rated for 70 W metal halide lamps
- Multi-voltage input from 120 to 277 V AC suits varied installations
- Operates at 60 Hz with 85 W input power
- Complies with California Proposition 65 chemical disclosure requirements
Lumapro 70 W HID Ballast Kit
This Lumapro kit supplies a single 70 W metal halide lamp with a pulse-start ballast rated for ANSI code M98. It operates on a 120 to 277 V AC supply at 60 Hz and draws 85 W input power. The unit is listed as new and carries California Proposition 65 warnings for cancer and reproductive harm. Suitable for interior lighting installations that require this specific ballast type.
Installers needing one pulse-start M98 ballast
Electricians or facility managers replacing a 70 W metal halide ballast with matching ANSI code and input voltage range will find this kit compatible. It supports exactly one lamp and starts down to -20 °F. Buyers who need multiple-lamp operation, a different ANSI designation, or a ballast for another lamp technology should look elsewhere.
Pulse-start ballast with ANSI M98 code
The pulse-start method and M98 designation are the primary identifiers that determine whether this ballast matches the existing fixture and lamp. Verify the ANSI code on the old ballast before purchasing, as an incorrect code will prevent proper lamp ignition and operation.
Highlights
- Pulse start enables reliable ignition in cold conditions down to -20°F
- Single-lamp kit rated for 70 W metal halide lamps
- Multi-voltage input from 120 to 277 V AC suits varied installations
- Operates at 60 Hz with 85 W input power
- Complies with California Proposition 65 chemical disclosure requirements
Specifications
| Brand | LUMAPRO |
|---|
Questions about this item
How is the 120 to 277V AC input wired during installation?
Connect the ballast leads to the supply wires matching the 120 to 277V AC range; the step often missed is verifying the ANSI M98 code on the lamp matches the ballast before powering up.
What maintenance will the 70 W metal halide lamp need later?
The single supported lamp will require replacement once its output drops or it fails to strike; the pulse-start ballast has no user-serviceable parts.
What limit appears first when the ballast runs continuously?
The 85 W input power and the -20°F minimum starting temperature define the thermal and cold-weather operating boundaries.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
