We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular electronic CFL ballast in light grey enclosure with terminal connections

Lumapro

Lumapro 16X957 CFL Ballast Electronic 104W 120-277V light kit

SKU CH-9H1V-TK3WJ

Electronic CFL ballast kit runs two to three PL-L lamps up to 40 watts each on 120 to 277 volt input

  • Electronic ballast operates 120 to 277 V AC
  • Instant start lights two or three PL-L lamps
  • 104 W total input handles up to 40 W per lamp
  • No dimming circuitry simplifies wiring and maintenance
  • Rated for cold starts down to 0 °F

Lumapro 16X957 CFL Ballast Kit

This electronic ballast kit operates two or three PL-L compact fluorescent lamps at up to 40 watts each. It accepts a wide 120 to 277 volt AC supply, making it suitable for commercial and institutional lighting installations. The instant-start design delivers immediate illumination without flicker or delay.

Sustained Load Behaviour

The ballast is rated for a maximum total lamp load of 104 watts across the supported bulbs. During continuous operation it maintains stable current to each lamp without audible noise or thermal cycling issues. No dimming function is present, so output remains constant at full rated power for the duration of use.

Interface Practical Limits

The 120 to 277 volt input range covers standard North American single-phase circuits without requiring a separate transformer. Minimum starting temperature is rated at 0 degrees Fahrenheit, limiting reliable cold-weather starts in unheated spaces. California Proposition 65 warnings apply for chemical content.

Highlights

  • Electronic ballast operates 120 to 277 V AC
  • Instant start lights two or three PL-L lamps
  • 104 W total input handles up to 40 W per lamp
  • No dimming circuitry simplifies wiring and maintenance
  • Rated for cold starts down to 0 °F

Specifications

BrandLUMAPRO

Questions about this item

How much heat and power does the 104 W ballast draw when running continuously?

The electronic ballast is rated for 104 W maximum input across the 120 to 277 V range, so continuous operation will draw up to that wattage and produce corresponding heat.

What lamps and wiring must I already have for this ballast to operate?

You need two or three PL-L compact fluorescent lamps, each no more than 40 W, plus a 120–277 V AC supply wired to the ballast input leads.

Will this instant-start ballast work with older PL-L lamps I have kept from a previous installation?

Yes, provided the lamps are PL-L type, 40 W or less per lamp, and you install two or three of them as the ballast supports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.