We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear polycarbonate cylinder, red grease visible, NPT fitting, spring-loaded continuous feeder

Lubesite

Lubesite Grease Feeder 6 oz 13 psi 250°F

SKU CH-BN0A-3F0CH

Automatic single-point grease feeder delivers continuous lubrication at 13 psi up to 250°F from a refillable 6 oz polycarbonate reservoir

  • Continuous lubrication from a 6 oz reservoir
  • Spring-driven at 13 psi for steady delivery
  • Operates up to 250 °F in hot environments
  • Refillable polycarbonate body with 1/8 in NPT connection
  • Starts working down to -10 °F in cold conditions

6 oz continuous grease feeder

The Lubesite grease feeder delivers a steady supply of lubricant to a single point from a 6 fl oz polycarbonate reservoir. It operates continuously at a fixed 13 psi spring force without adjustable flow settings. The unit arrives ready for installation with springs included and a 1/8 in NPT connection.

Check connection and temperature range

Verify that the lubrication point accepts a 1/8 in NPT fitting before ordering. The feeder functions between -10 degrees F and 250 degrees F, so confirm the application stays within these limits. Ensure the mounting location can accommodate the 3 in diameter and 6 in height of the unit.

Fits single-point systems needing constant feed

The refillable design eliminates the need for manual re-greasing intervals on compatible equipment. Its non-adjustable output suits installations where a consistent, low-pressure flow is preferred over metered doses. The red grease colour allows visual confirmation of flow through the transparent housing.

Highlights

  • Continuous lubrication from a 6 oz reservoir
  • Spring-driven at 13 psi for steady delivery
  • Operates up to 250 °F in hot environments
  • Refillable polycarbonate body with 1/8 in NPT connection
  • Starts working down to -10 °F in cold conditions

Specifications

BrandLubeSite

Questions about this item

Does the 6 fl oz Lubesite feeder arrive with grease already inside or must I supply my own?

The feeder is not pre-filled, so you must supply the grease yourself; the unit is refillable and the red colour shown is only a visual reference.

Should I select a different spring pressure or capacity for a high-temperature bearing?

This model has a fixed 13 psi spring and a single 6 fl oz capacity; no alternative pressures or volumes are offered for this part number.

Will the 250 °F maximum rating hold up on a bearing that runs near that limit continuously?

The feeder is rated to 250 °F maximum and -10 °F minimum, so continuous operation at the upper limit is within the specified temperature range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.