LSI
LSI SAS9201-8I 6Gbps PCI Express 2.0 x8 8-Port SAS/SATA Controller Card
Connects eight SAS or SATA drives via a PCI Express 2.0 x8 slot at 6Gbps
- Typebuffer_22811
- Data Transfer Rate6Gbps
- 6 Gbps data rate for fast storage throughput
- PCI Express 2.0 x8 host interface for broad server compatibility
- Eight SAS and SATA ports to connect multiple drives
- LSI Logic controller architecture for reliable RAID and JBOD support
- Retail part number SAS9201-8I for easy identification
Eight-port SAS/SATA controller for storage expansion
This LSI SAS9201-8I card adds eight SAS or SATA connections through a single PCI Express 2.0 x8 slot. It suits system builders who need to attach multiple hard drives or solid-state drives without using onboard ports. The card supports 6Gbps data transfer on each port.
Steady throughput across all eight ports
The controller maintains consistent 6Gbps signalling on every lane during sustained transfers rather than peaking in short bursts. Workloads such as large file copies, backups or parity checks run at line rate without throttling. Firmware manages command queues to keep latency predictable under continuous load.
Low power draw and passive cooling
The board operates within the slot power envelope and uses a passive heatsink, so it adds no fan noise to the chassis. Typical draw stays modest even when all eight ports are active. No auxiliary power connector is required for normal operation.
Highlights
- 6 Gbps data rate for fast storage throughput
- PCI Express 2.0 x8 host interface for broad server compatibility
- Eight SAS and SATA ports to connect multiple drives
- LSI Logic controller architecture for reliable RAID and JBOD support
- Retail part number SAS9201-8I for easy identification
Specifications
| Brand | LSI LOGIC |
|---|---|
| Type | buffer_22811 |
| Data Transfer Rate | 6Gbps |
Questions about this item
Does the SAS9201-8I need active cooling when running all day?
The card has no onboard fan and relies on chassis airflow; it draws power from the PCI Express 2.0 x8 slot and runs at the 6Gbps data rate without extra power connectors.
What slot and cables are required to use the eight ports?
A free PCI Express 2.0 x8 slot and standard SAS or SATA data cables for each drive you connect to the eight internal ports.
Will the 6Gbps controller slow down older 3Gbps SATA drives I keep?
Each port negotiates independently, so 3Gbps SATA drives run at their native speed while newer 6Gbps drives use the full rate.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



