LPScreen
LPScreen N140JCA-EEK REV.C1 14" WUXGA 1920x1200 60Hz laptop screen
A 14 inch WUXGA 1920x1200 60Hz non-touch laptop replacement screen with 30 pin connector and 250 cd/m² brightness
- Compatible ModelsN140JCA-EEKREV.C1
- Screen Size14"
- Screen ResolutionWUXGA 1920x1200
- Sharp visuals with 1920x1200 WUXGA resolution
- Smooth motion from 60Hz refresh rate
- Wide viewing with 89-degree angles
- Crisp detail at 250 cd/m² brightness
- Ready to install with 30-pin connector
Replacement Screen for 14" Laptops
This LPScreen panel is a direct replacement for the N140JCA-EEK REV.C1 model. It delivers a WUXGA resolution of 1920x1200 on a 14 inch diagonal. The 60Hz refresh rate and 250 cd/m² brightness suit everyday office work and media playback.
Buyers Matching the Exact Part Number
The panel fits devices designed for the 30-pin connector and the specific REV.C1 revision. It is not suitable for laptops requiring a touch digitiser, a higher refresh rate, or a different pin layout. Buyers needing wider colour coverage than 45% NTSC should look elsewhere.
Connector and Revision Decide Fit
The single specification that determines compatibility is the 30-pin connector paired with the REV.C1 designation. Verify this exact part number on your original screen before ordering to ensure the replacement matches your laptop's interface.
Highlights
- Sharp visuals with 1920x1200 WUXGA resolution
- Smooth motion from 60Hz refresh rate
- Wide viewing with 89-degree angles
- Crisp detail at 250 cd/m² brightness
- Ready to install with 30-pin connector
Specifications
| Model | N140JCA-EEKREV.C1 |
|---|---|
| Part Number | N140JCA-EEKREV.C1 |
| Compatible Models | N140JCA-EEKREV.C1 |
| Screen Size | 14" |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
Does my laptop need a 30-pin eDP connector for this N140JCA-EEK REV.C1 panel?
Yes, the screen uses a 30-pin connector; verify your current panel has the same pin count and cable routing before ordering.
Will this 60 Hz WUXGA display work if my original screen ran at a different refresh rate?
The panel is fixed at 60 Hz; most laptops negotiate the rate automatically, but check that your system BIOS or GPU driver does not lock to a higher native refresh.
How can I confirm the 1920x1200 resolution and 250 cd/m² brightness are active after fitting the screen?
Open display settings to verify 1920x1200 at 60 Hz, then use a calibration tool or the OS brightness slider to confirm the panel reaches its rated 250 cd/m² level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



