LPScreen
LPScreen MNF156BS1-2 15.6" Full HD 1920x1080 60Hz laptop screen
A 15.6 inch non-touch laptop replacement panel with 1920x1080 resolution, 60Hz refresh, 300 cd/m² brightness and a 30-pin connector
- Compatible ModelsMNF156BS1-2
- Screen Size15.6"
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp 15.6" Full HD visuals at 1920x1080 resolution
- Smooth 60Hz refresh rate for fluid motion
- Wide 89° viewing angles on all four sides
- Bright 300 cd/m² panel with 1200:1 contrast
- 30-pin connector fits MNF156BS1-2 models without touch
Exact Replacement Screen
The LPScreen MNF156BS1-2 is a 15.6 inch Full HD panel built to replace the original display in compatible laptops. It delivers a 1920x1080 resolution at 60Hz with a non-touch surface. Buyers who need a touchscreen or a different resolution cannot use this model.
30 Pin Connector Build
A 30 pin connector links the panel to the motherboard, so the existing cable must match this pin count exactly. The matte finish reduces glare, while 300 cd/m² brightness and a 1200:1 contrast ratio provide clear indoor viewing. Wide 89 degree angles keep colours consistent from the sides.
Check Before Ordering
Verify the part number on the back of your current screen reads MNF156BS1-2 before purchasing. Confirm the laptop uses a 30 pin video cable and does not require a touch digitiser. The panel covers 42 percent NTSC colour gamut, which suits general office work but not colour critical editing.
Highlights
- Sharp 15.6" Full HD visuals at 1920x1080 resolution
- Smooth 60Hz refresh rate for fluid motion
- Wide 89° viewing angles on all four sides
- Bright 300 cd/m² panel with 1200:1 contrast
- 30-pin connector fits MNF156BS1-2 models without touch
Specifications
| Model | MNF156BS1-2 |
|---|---|
| Part Number | MNF156BS1-2 |
| Compatible Models | MNF156BS1-2 |
| Screen Size | 15.6" |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
What does the 30-pin connector limit in practice?
The 30-pin connector supports 1920x1080 resolution at 60Hz refresh rate for standard laptop video signals.
What physical dimensions and mounting does the 15.6" panel need?
The 15.6 inch panel uses standard laptop mounting brackets and requires a 30-pin connector slot on the motherboard.
How is the screen installed and what step do people miss?
Disconnect the battery, remove the bezel, unplug the old 30-pin cable, fit the new panel, reconnect the cable securely, then test before reassembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington K50421WW laptop stand accessory
- Stand
- SmartFit System Sim…
Kensington 52795 24" 16:9 Privacy Screen Accessory
- Screen Protector
- Designed for 16:9 a…
Ergotron 80-107-200 CPU Mount for Thin Client and Flat Panel Display accessory
- Black



