LPScreen
LPScreen LP125WF2 (SP)(B4) 12.5 inch FHD IPS laptop screen
12.5 inch IPS panel with 1920x1080 resolution, 300 cd/m² brightness, 600:1 contrast, 60 Hz refresh and 30-pin connector
- Compatible ModelsLP125WF2(SP)(B4)
- Screen Size12.5”
- Screen ResolutionFull HD (FHD) 1920x1080
- FHD 1920x1080 resolution for sharp detail
- IPS panel with 80° viewing angles for consistent colour
- 300 cd/m² brightness for clear indoor visibility
- 30-pin connector and side brackets for direct fit
- 60 Hz refresh with 16.7M colours for smooth video
Exact Replacement Screen
This 12.5 inch IPS panel is a direct replacement for the LP125WF2 (SP)(B4) model. It matches the original 1920x1080 resolution and 30 pin connector layout. The side bracket mounting points align with the factory chassis. Buyers who need a touch-enabled display or a different connector pin count cannot use this part.
Thermal and Power Profile
The panel operates at a standard 60Hz refresh rate with a typical brightness of 300 cd/m². As a passive display component it generates negligible heat and draws minimal power from the laptop’s internal supply. No active cooling or external power adapter is required for normal operation.
Deciding Specification
The 30 pin connector and side bracket mounting define physical compatibility with the target laptop. Verify that the original screen uses the identical pin-out and bracket position before ordering. A mismatch in either detail will prevent installation.
Highlights
- FHD 1920x1080 resolution for sharp detail
- IPS panel with 80° viewing angles for consistent colour
- 300 cd/m² brightness for clear indoor visibility
- 30-pin connector and side brackets for direct fit
- 60 Hz refresh with 16.7M colours for smooth video
Specifications
| Model | LP125WF2(SP)(B4) |
|---|---|
| Part Number | LP125WF2(SP)(B4) |
| Compatible Models | LP125WF2(SP)(B4) |
| Screen Size | 12.5” |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
How do I install the LP125WF2 (SP)(B4) screen and what step do people get wrong?
Remove the bezel, disconnect the old 30-pin cable, fit the new panel using the side brackets, then reconnect the 30-pin connector securely; the step most people miss is fully seating the 30-pin connector on both ends before screwing the bezel back on.
What maintenance or replacement will the LP125WF2 (SP)(B4) need later?
The panel itself has no user-serviceable parts; if brightness drops below the rated 300 cd/m² or the 600:1 contrast degrades, the whole screen must be replaced rather than repaired.
What limit appears first on the LP125WF2 (SP)(B4) during sustained use?
The 60 Hz refresh rate and 50 % NTSC colour gamut are fixed hardware limits; they do not change with extended operation, so the first ceiling you hit is the panel’s native 60 Hz refresh and 16.7 M colour depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



