LPScreen
LPScreen LP125WF2 (SP)(B3) 12.5" FHD 1920x1080 IPS laptop screen
12.5 inch FHD IPS laptop replacement screen with 1920x1080 resolution, 60Hz refresh rate, 300 cd/m² brightness and 30-pin connector
- Compatible ModelsLP125WF2(SP)(B3)
- Screen Size12.5”
- Screen ResolutionFull HD (FHD) 1920x1080
- Crisp Full HD detail at 1920x1080 resolution
- Wide viewing with 80-degree IPS angles
- Bright 300 cd/m² panel for clear visibility
- 60 Hz refresh rate for smooth motion
- 30-pin connector fits LP125WF2 (SP)(B3) models
Compatibility and fit
This replacement screen matches the exact LP125WF2(SP)(B3) model number with 30-pin connector and side-bracket mountings. It is built for owners of laptops that originally shipped with this panel and need a direct swap. Builders working on other chassis or connector layouts should look elsewhere.
Panel specifications that decide fit
The 12.5-inch IPS panel delivers 1920x1080 resolution at 60 Hz with 300 cd/m² brightness and 600:1 contrast. Colour coverage is 262K at 50% NTSC and viewing angles reach 80 degrees in all four directions. No touch layer is present. Buyers needing higher refresh rates, wider gamut or touch input must choose a different panel.
Deciding specification
The 30-pin connector combined with side-bracket mounting is the single detail that determines whether this screen will install without modification. Verify the original panel uses the same pin count and bracket style before ordering.
Highlights
- Crisp Full HD detail at 1920x1080 resolution
- Wide viewing with 80-degree IPS angles
- Bright 300 cd/m² panel for clear visibility
- 60 Hz refresh rate for smooth motion
- 30-pin connector fits LP125WF2 (SP)(B3) models
Specifications
| Model | LP125WF2(SP)(B3) |
|---|---|
| Part Number | LP125WF2(SP)(B3) |
| Compatible Models | LP125WF2(SP)(B3) |
| Screen Size | 12.5” |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
What interface does the 30-pin connector use and what refresh rate does it support?
The 30-pin connector carries a standard eDP signal limited to 60 Hz at 1920×1080 resolution.
What mounting style does the 12.5-inch panel use for installation?
The panel has side brackets that align with the laptop's hinge screw holes.
How is the screen installed and which step is most often missed?
Disconnect the battery, remove the bezel, swap the panel, reconnect the 30-pin cable, then test before refitting the bezel; skipping the battery disconnect risks a short.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



