LPScreen
LPScreen LM156LFCL05 15.6" FHD 1920x1080 60Hz laptop screen
A 15.6 inch Full HD laptop replacement screen with 60 Hz refresh rate, 220 cd/m² brightness and a 30-pin connector
- Compatible ModelsLM156LFCL05
- Screen Size15.6"
- Screen ResolutionFull HD (FHD) 1920x1080
- Sharp Full HD detail with 1920x1080 resolution
- Smooth 60 Hz refresh for everyday tasks
- Wide 85-degree viewing angles on all sides
- 30-pin connector fits LM156LFCL05 models
- 220 cd/m² brightness and 1000:1 contrast
Replacement display specification
This is a new 15.6 inch Full HD laptop replacement screen with a 1920x1080 resolution and 60Hz refresh rate. It uses a 30-pin connector and delivers 220 cd/m² brightness with a 1000:1 contrast ratio. The panel covers 45% NTSC colour gamut and offers 85-degree viewing angles in all directions.
Who this fits and who it does not
The part is built for devices that require the exact LM156LFCL05 model or a compatible equivalent. It is not suitable for laptops needing a touchscreen layer or a different pin layout. Buyers wanting higher refresh rates, wider colour coverage or alternative connector types should look elsewhere.
Critical compatibility detail
The 30-pin connector is the single specification that determines whether this screen will install and function correctly. Verify the original panel uses the same 30-pin interface before ordering.
Highlights
- Sharp Full HD detail with 1920x1080 resolution
- Smooth 60 Hz refresh for everyday tasks
- Wide 85-degree viewing angles on all sides
- 30-pin connector fits LM156LFCL05 models
- 220 cd/m² brightness and 1000:1 contrast
Specifications
| Model | LM156LFCL05 |
|---|---|
| Part Number | LM156LFCL05 |
| Compatible Models | LM156LFCL05 |
| Screen Size | 15.6" |
| Screen Resolution | Full HD (FHD) 1920x1080 |
Questions about this item
Does my laptop need a 30-pin eDP connector to accept this LM156LFCL05 panel?
Yes, the screen uses a 30-pin connector, so the host laptop must provide a matching 30-pin eDP interface for the panel to work.
Will the 60 Hz refresh rate and 220 cd/m² brightness match my original 15.6" FHD display?
The panel runs at 60 Hz with 220 cd/m² brightness, 1000:1 contrast and 45 % NTSC colour, matching typical spec for a standard 15.6" FHD replacement.
How can I confirm the LM156LFCL05 is operating correctly after installation?
Verify the BIOS shows a 15.6" 1920x1080 panel at 60 Hz, check for uniform 220 cd/m² brightness, 85-degree viewing angles and no dead pixels across the 262K colour gamut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



