LPScreen
LPScreen B160UAK01.1 16" WUXGA 1920x1200 60Hz Touch laptop screen
A 16 inch WUXGA touchscreen panel with 1920x1200 resolution, 60Hz refresh, 300 cd/m² brightness and a 40-pin connector
- Compatible ModelsB160UAK01.1HW0A
- Screen Size16”
- Screen ResolutionWUXGA 1920x1200
- WUXGA 1920x1200 resolution gives sharp detail on 16" panel
- 60 Hz refresh rate delivers smooth motion for daily tasks
- Touch-enabled display supports direct input on 16.7M colour screen
- 300 cd/m² brightness ensures clear visibility in typical lighting
- 40-pin connector matches original B160UAK01.1 HW0A specification
16-inch WUXGA touch panel
This 16-inch laptop replacement screen delivers WUXGA 1920x1200 resolution at 60Hz with touch input. It offers 300 cd/m² brightness, a 1200:1 contrast ratio and 16.7 million colours covering 45% NTSC. The panel uses a 40-pin connector and provides 85-degree viewing angles in all directions.
Buyers needing touch on a 16-inch WUXGA panel
This display suits owners of a B160UAK01.1 HW0A assembly who require touch functionality. Builders without a 40-pin eDP interface or those needing a higher refresh rate should look elsewhere.
40-pin connector requirement
The single specification that decides fit is the 40-pin eDP connector on the panel. Verify the existing cable and motherboard header match this pin count before ordering.
Highlights
- WUXGA 1920x1200 resolution gives sharp detail on 16" panel
- 60 Hz refresh rate delivers smooth motion for daily tasks
- Touch-enabled display supports direct input on 16.7M colour screen
- 300 cd/m² brightness ensures clear visibility in typical lighting
- 40-pin connector matches original B160UAK01.1 HW0A specification
Specifications
| Model | B160UAK01.1HW0A |
|---|---|
| Part Number | B160UAK01.1HW0A |
| Compatible Models | B160UAK01.1HW0A |
| Screen Size | 16” |
| Screen Resolution | WUXGA 1920x1200 |
Questions about this item
How do I install the 40-pin connector on the B160UAK01.1 HW0A without damaging the ribbon?
Power off the laptop and disconnect the battery. Release the ZIF latch on the motherboard, insert the 40-pin ribbon straight and fully seated, then flip the latch down to lock it before reassembling.
Will the touch digitiser on this 16.7M colour panel need recalibration or replacement over time?
The capacitive touch layer is bonded to the glass; it does not require periodic recalibration. Only physical damage or a failed controller would require replacement of the complete assembly.
At what point does the 300 cd/m² backlight limit visibility during long sessions in bright rooms?
At 300 cd/m² the panel remains readable in typical indoor lighting, but direct sunlight or strong glare will wash out the 1200:1 contrast before the backlight itself becomes the bottleneck.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



