LPScreen
LPScreen B140QAN05.H HW1A 14" 2240x1400 60Hz laptop screen
14-inch 2240x1400 60 Hz replacement laptop panel with 300 cd/m² brightness, 1200:1 contrast, 99% sRGB colour and 40-pin connector
- Compatible ModelsB140QAN05.HHW1A
- Screen Size14"
- Screen Resolution2240x1400
- Sharp 2240×1400 resolution on a 14″ panel
- 300 cd/m² brightness for clear indoor viewing
- 1200:1 contrast ratio adds depth to images
- 99 % sRGB colour coverage for accurate tones
- 40-pin connector fits compatible 14″ laptops
Compatible laptop models
This replacement panel matches the B140QAN05.H HW1A part number used in specific 14 inch laptops. It delivers a 2240x1400 resolution at 60 Hz with a 40 pin connector. The matte finish shows 16.7 million colours covering 99 percent sRGB. Buyers must verify the exact part number on their original screen before ordering.
Use-case fit
The panel suits owners of a compatible laptop who need a direct swap for a damaged or dim display. It is not for users who require touch input, a higher refresh rate, or a different connector layout. Laptops with a different part number or screen size will not accept this unit.
Deciding specification
The 40 pin connector and 2240x1400 resolution at 60 Hz are the critical match points. If the original screen uses a different pin count, resolution, or refresh rate, this panel will not work. Confirm the part number printed on the cable side of the old screen.
Highlights
- Sharp 2240×1400 resolution on a 14″ panel
- 300 cd/m² brightness for clear indoor viewing
- 1200:1 contrast ratio adds depth to images
- 99 % sRGB colour coverage for accurate tones
- 40-pin connector fits compatible 14″ laptops
Specifications
| Model | B140QAN05.HHW1A |
|---|---|
| Part Number | B140QAN05.HHW1A |
| Compatible Models | B140QAN05.HHW1A |
| Screen Size | 14" |
| Screen Resolution | 2240x1400 |
Questions about this item
My laptop uses a 40-pin eDP cable — will this screen connect directly?
Yes, the panel has a 40-pin connector that matches the eDP cable on compatible models.
I am keeping the original 60 Hz panel — does this replacement run at the same refresh rate?
The screen operates at 60 Hz, identical to the original panel, so no driver or BIOS change is needed.
After fitting the screen, how can I confirm the 99 % sRGB coverage is active?
Open a colour-gamut test pattern or run a calibration tool; it should report 99 % sRGB and 16.7 M colours.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



