LPScreen
LPScreen B140QAN05.0 14" 2240x1400 60Hz laptop screen
A 14 inch 2240x1400 60Hz non-touch laptop replacement screen with 300 cd/m² brightness, 1200:1 contrast, 100% sRGB colour and a 40-pin connector
- Compatible ModelsB140QAN05.0
- Screen Size14"
- Screen Resolution2240x1400
- Sharp 2240x1400 resolution on a 14 inch panel
- 100% sRGB colour with 16.7M colours for accurate hues
- 300 cd/m² brightness suits indoor and outdoor use
- 1200:1 contrast ratio adds depth to dark scenes
- Wide 85° viewing angles keep colours consistent from the side
Product Identity
This is a new 14 inch laptop replacement screen built to the B140QAN05.0 specification. It delivers a 2240x1400 resolution at a 60Hz refresh rate with a 40 pin connector.
Fit and Limits
The panel suits owners of laptops that originally used the B140QAN05.0 model and need a non touch display with 100 percent sRGB colour coverage. Buyers whose devices require a touch layer or a different pin layout should look elsewhere.
What Changes
The 300 cd/m² brightness and 1200:1 contrast ratio improve visibility over dimmer or lower contrast originals. Wide 85 degree viewing angles preserve colour consistency when the screen is viewed off centre.
Highlights
- Sharp 2240x1400 resolution on a 14 inch panel
- 100% sRGB colour with 16.7M colours for accurate hues
- 300 cd/m² brightness suits indoor and outdoor use
- 1200:1 contrast ratio adds depth to dark scenes
- Wide 85° viewing angles keep colours consistent from the side
Specifications
| Model | B140QAN05.0 |
|---|---|
| Part Number | B140QAN05.0 |
| Compatible Models | B140QAN05.0 |
| Screen Size | 14" |
| Screen Resolution | 2240x1400 |
Questions about this item
Does my laptop need a 40-pin eDP connector to accept this B140QAN05.0 panel?
Yes, the screen uses a 40-pin connector, so the host laptop must provide a matching 40-pin eDP interface for it to work.
Will the 60 Hz refresh rate of this 2240x1400 panel feel different if I keep an older 60 Hz external monitor?
Both displays run at 60 Hz, so motion smoothness will be consistent between the internal 14-inch panel and an older 60 Hz external monitor.
How can I verify the panel is delivering the specified 300 cd/m² brightness and 100 % sRGB coverage after installation?
Use a calibration tool or software that reads the EDID and measures luminance; the panel should report 300 cd/m² maximum brightness and 100 % sRGB gamut when measured at default settings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



