LPScreen
LPScreen B135QAN01.0 13.5 inch 2256x1504 60Hz laptop screen
13.5 inch 2256x1504 LCD panel with 60 Hz refresh, 450 cd/m² brightness and 100 % sRGB colour for non-touch laptops
- Compatible ModelsB135QAN01.0
- Screen Size13.5”
- Screen Resolution2256x1504
- Sharp 2256x1504 resolution for crisp detail
- 100% sRGB colour gamut for accurate tones
- 450 cd/m² brightness for clear viewing
- Wide 89° viewing angles from every side
- 40-pin connector fits B135QAN01.0 models
Exact replacement screen
The LPScreen B135QAN01.0 is a 13.5 inch LCD panel built to match the original 2256x1504 resolution and 60Hz refresh rate. It fits laptops that specify the B135QAN01.0 part number and use a 40-pin connector without a touch layer.
Upgrade from lower-resolution or damaged panels
Swapping in this display restores the factory 2256x1504 pixel count and 100% sRGB colour coverage when the original screen is cracked, dim or showing a lower native resolution. The jump is worth it when the laptop chassis and cable are confirmed compatible with the B135QAN01.0 model.
450 cd/m² brightness and 1200:1 contrast
The panel delivers 450 cd/m² peak brightness and a 1200:1 contrast ratio, handling office documents, web browsing and colour-critical tasks under typical indoor lighting. Wide 89-degree viewing angles keep colour consistent off-centre, but the 60Hz refresh rate and lack of touch support limit suitability for high-motion gaming or pen input workflows.
Highlights
- Sharp 2256x1504 resolution for crisp detail
- 100% sRGB colour gamut for accurate tones
- 450 cd/m² brightness for clear viewing
- Wide 89° viewing angles from every side
- 40-pin connector fits B135QAN01.0 models
Specifications
| Model | B135QAN01.0 |
|---|---|
| Part Number | B135QAN01.0 |
| Compatible Models | B135QAN01.0 |
| Screen Size | 13.5” |
| Screen Resolution | 2256x1504 |
Questions about this item
Does the 40-pin connector on this 13.5 inch panel match the motherboard socket on a B135QAN01.0 laptop?
The panel uses a 40-pin connector designed for the B135QAN01.0 model. Align the cable carefully before locking the latch; forcing it upside down is the most common installation error.
What tools and steps are required to swap the old B135QAN01.0 display for this replacement?
Remove the bezel screws, disconnect the 40-pin cable from the old screen, connect the new panel, then test before reassembling. Forgetting to test before snapping the bezel back is the step people miss.
How long does the backlight on this 450 cd/m² LCD typically last before it dims noticeably?
The LED backlight is rated for tens of thousands of hours at 450 cd/m². When brightness eventually drops, the whole 13.5 inch panel is replaced rather than servicing the backlight alone.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Panasonic CF-LNDDC120 120W Car AC Adapter
- Auto Adapter
- Panasonic Toughbook…
Digital Gadgets 2-in-1 Business Carrier 14" Gray
- Carrying Case
- Gray



