Louisville
Louisville FM1503 3 ft Fiberglass Twin Stepladder 300 lb
A 3 ft fiberglass twin stepladder rated for 300 lb with ribbed steps and SHOX protection
- MaterialHAWA
- Fiberglass rails resist electrical conduction for safer work near power
- ANSI Type IA rating supports 300 lb load capacity for heavy-duty use
- SHOX impact absorption protects the ladder from drops and rough handling
- Da Boot slip-resistant feet grip surfaces to reduce sliding accidents
- Twin stepladder design lets two people climb at the same time
3 ft Fiberglass Twin Stepladder
The Louisville FM1503 is a 3 ft fiberglass twin stepladder rated for 300 lb ANSI Type IA duty. It provides two-sided access for electrical, maintenance and general trade work where a compact, non-conductive platform is required.
Before ordering
Confirm the 31 in base spread fits your work area and that the 17 3/4 in bottom width clears doorways or aisles. Check that the 12 in rung spacing and 3 in step depth suit the user’s stride and footwear. Ensure the 3 ft ladder height reaches the intended work level without over-reaching.
Replaces lower-rated or single-sided ladders
The 300 lb Type IA rating upgrades from lighter Type II or III models when heavier tools or materials are carried. Twin-side climbing replaces single-sided step ladders where two workers share access or where frequent side changes save time. The fiberglass rails replace aluminum when electrical insulation is required on site.
Highlights
- Fiberglass rails resist electrical conduction for safer work near power
- ANSI Type IA rating supports 300 lb load capacity for heavy-duty use
- SHOX impact absorption protects the ladder from drops and rough handling
- Da Boot slip-resistant feet grip surfaces to reduce sliding accidents
- Twin stepladder design lets two people climb at the same time
Specifications
| Brand | LOUISVILLE |
|---|---|
| Material | HAWA |
Questions about this item
Does the Louisville FM1503 come with the Da Boot foot pads already attached, or must they be purchased separately?
The Da Boot foot pads are included with the ladder and do not need to be bought separately.
Should I choose the FM1503 or another model in the FM1500 series for a 300 lb load capacity?
The FM1503 is rated for 300 lb and meets ANSI Type IA standards, matching the series capacity.
What does the 300 lb ANSI Type IA rating mean when I am standing on the second step?
It certifies the ladder can safely support a 300 lb user plus tools on either step when fully opened with spreader braces locked.
More in Lifting, Pulling & Conveying
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
