We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 female to silver DC 7.9x5.4mm male adapter cable

LORDWORLD

LORDWORLD XT60 to DC 7.9x5.4mm Adapter

SKU CH-ZM3P-RDWQD

Connects an XT60 battery to a DC 7.9x5.4mm device such as a TS100 soldering iron, FPV gear or RC models

  • Powers TS100 soldering iron directly from XT60 battery
  • Works with FPV drones, solar rigs and RC toys
  • High-temperature resistant materials protect against heat during use
  • Plug-and-play design needs no tools or configuration
  • XT60 female to DC 7.9x5.4mm male connector fit

XT60 to DC 7.9x5.4mm Adapter for Field Power

This adapter connects an XT60 female connector to a DC 7.9x5.4mm male plug. It is designed for powering a TS100 soldering iron from a compatible battery pack. The unit serves FPV pilots, drone operators and hobbyists who need portable power for repairs. It suits anyone working with quadcopters, multicopters or remote control vehicles.

High Temperature Resistance and Plug Play Build

The housing uses high quality material rated for high temperature resistance and good insulation. A plug and play design requires no soldering or tools during field use. The XT60 side mates securely with standard battery outputs while the DC plug fits the TS100 input. This construction supports repeated connection cycles in outdoor conditions.

Replaces Improvised Wiring for TS100 Power

The adapter removes the need for custom cables or soldered joints when running a TS100 iron from a flight pack. It upgrades from fragile temporary leads that can short or melt under load. The jump is worth it for pilots who regularly repair frames or electronics at the flying field. Users needing a different DC barrel size or a higher current rating than the SC100 protocol allows should look elsewhere.

Highlights

  • Powers TS100 soldering iron directly from XT60 battery
  • Works with FPV drones, solar rigs and RC toys
  • High-temperature resistant materials protect against heat during use
  • Plug-and-play design needs no tools or configuration
  • XT60 female to DC 7.9x5.4mm male connector fit

Specifications

BrandLORDWORLD

Questions about this item

What current does the XT60 connector handle in practice?

The XT60 connector is rated for 60 A continuous current, so it will deliver the full output of a typical 100 W TS100 soldering iron without overheating.

What size DC barrel plug does the adapter provide for the TS100?

The male DC plug measures 7.9 mm outer diameter by 5.4 mm inner diameter, matching the TS100 soldering iron power input exactly.

How do you connect the adapter without reversing polarity?

The XT60 female end is keyed so it only mates one way; align the yellow housing with the battery XT60 male and push until it clicks, then insert the DC plug into the TS100.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.