We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 male-to-female right-angle adapter with textured grip sides

LORDWORLD

LORDWORLD XT60 Male to Female Angled Adapter

SKU CH-HT4A-9294X

An angled XT60 male-to-female adapter connects TS100 soldering irons and powers FPV drones, RC vehicles or solar gear from a lipo battery

  • XT60 male-to-female angle clears tight battery bays
  • High-temperature materials protect contacts during fast 100 A charging
  • Plug-and-play design powers TS100 iron straight from flight pack
  • Single adapter serves FPV drones, solar rigs, RC cars
  • Compact right-angle shape eases field repairs on multicopters

XT60 angled adapter for field power

This XT60 male-to-female adapter adds a horizontal bend so cables run parallel to a battery or chassis. It targets FPV pilots, drone builders and hobbyists who need a low-profile link between a 60 A-rated battery lead and devices such as a TS100 soldering iron. The right-angle shape reduces strain on the connector during vibration-heavy flights or tight frame layouts.

Thermals and power handling

High-temperature-resistant insulation and a plug-and-play design keep resistance low at the rated 60 A continuous load. No active cooling is required because the connector body dissipates heat through its housing during normal soldering-iron or motor-current draws. The adapter adds negligible voltage drop and introduces no audible noise in typical RC or field-repair sessions.

Build quality and daily use

The moulded shell locks the male and female XT60 ends securely, preventing accidental disconnection when a quadcopter banks or a bench cable is tugged. Horizontal orientation lets the cable lie flat against frames, solar-panel junctions or vehicle mounts without protruding. Users who need a straight-through inline connection or a different polarity key will need a separate adapter style.

Highlights

  • XT60 male-to-female angle clears tight battery bays
  • High-temperature materials protect contacts during fast 100 A charging
  • Plug-and-play design powers TS100 iron straight from flight pack
  • Single adapter serves FPV drones, solar rigs, RC cars
  • Compact right-angle shape eases field repairs on multicopters

Specifications

BrandLORDWORLD

Questions about this item

How do I connect the XT60 male side to my TS100 soldering iron without stressing the joint?

Plug the male XT60 into the iron's XT60 port, then route the female end horizontally so the cable lies flat; the angled body prevents the connector from levering upward during use.

Will the high-temperature insulation degrade if I run the adapter at 60 A continuously?

The housing uses high-temperature resistant material rated for the connector's 60 A capacity, but prolonged maximum-load sessions will gradually embrittle the plastic — inspect for discolouration after heavy field use.

At what current does the contact resistance become the limiting factor during a long FPV flight?

Resistance rises noticeably above 60 A sustained, so the adapter itself becomes the bottleneck before the battery or wiring in typical 100 A-class setups.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.