We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 male to EC5 male adapter cable with black wiring

LORDWORLD

LORDWORLD XT60 Male SC100 to EC5 Male Adapter

SKU CH-20XE-4A8SK

XT60 male to EC5 male adapter connects TS100 soldering irons and RC LiPo batteries with SC100 protocol support

  • Connect TS100 soldering iron directly to XT60 battery packs
  • Compact EC5 design fits most lipo chargers without obstruction
  • XT60 male to EC5 male enables fast charging for RC lipos
  • SC100 protocol support suits FPV drones and aeromodelling builds
  • New condition ensures reliable power delivery for vehicles and solar setups

Connector Types and Compatibility

This adapter joins an XT60 male plug to an EC5 male plug, letting you connect devices with mismatched power leads. It supports the SC100 fast-charging protocol so compatible chargers can negotiate higher current. The EC5 end is separated from the balance leads for a more compact fit in tight battery compartments. It works with most LiPo chargers on the market.

TS100 Soldering Iron Use

The cable is designed to power a TS100 soldering iron directly from an XT60-equipped battery pack. This removes the need for a separate mains supply when working in the field. The SC100 handshake ensures the iron receives the correct voltage and current without manual adjustment. Builders can solder repairs trackside using only their flight battery.

Field Repair and RC Power

Pilots who need to run a TS100 or charge packs through an EC5 port while carrying only XT60 batteries will find this adapter useful. It is not suited for users who require a female XT60 socket or who need to balance-charge through the same connector. Builders wanting a permanent panel-mount solution should look at dedicated bulkhead connectors instead.

Highlights

  • Connect TS100 soldering iron directly to XT60 battery packs
  • Compact EC5 design fits most lipo chargers without obstruction
  • XT60 male to EC5 male enables fast charging for RC lipos
  • SC100 protocol support suits FPV drones and aeromodelling builds
  • New condition ensures reliable power delivery for vehicles and solar setups

Specifications

BrandLORDWORLD

Questions about this item

Will the XT60 or EC5 connectors need replacement after repeated mating cycles?

Both XT60 and EC5 connectors are rated for many insertion cycles; inspect for pitting or looseness and replace only if contact resistance rises.

What limits continuous current through the SC100 protocol link?

The adapter handles up to 60 A continuous; the SC100 handshake negotiates up to 100 W, so sustained draw above 60 A will hit the connector rating first.

Does the adapter get hot or make noise when powering a TS100 iron all day?

No active components mean silent operation; warmth stays low at normal loads, but sustained 60 A may produce noticeable heat at the connector bodies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.