LORDWORLD
LORDWORLD XT60 Male SC100 to DC 5.5x2.1mm Male Adapter
Connects a TS100 soldering iron or DC 5.5×2.1 mm device to an XT60 battery for field repairs and FPV power
- Connect TS100 soldering iron directly to XT60 battery for field repairs
- XT60 male to DC 5.5x2.1mm male enables fast charging from LiPo packs
- SC100 protocol support delivers up to 100 W power for demanding devices
- Compact adapter suits FPV drones, RC vehicles, solar cells and toys
- Male-to-male design eliminates extra cables for quick, secure connections
XT60 Male SC100 to DC 5.5×2.1mm Adapter
This adapter converts an XT60 male output to a DC 5.5×2.1mm male plug. It is intended for FPV pilots, drone operators and hobbyists who need to power a TS100 soldering iron or similar DC device from a LiPo battery in the field.
Compatibility check
Verify that your power source provides an XT60 female receptacle and that the device you are powering accepts a 5.5 mm outer diameter and 2.1 mm inner diameter DC barrel connector. Confirm the voltage and current limits of both the battery and the load before connecting.
Sustained-load behaviour
The SC100 protocol supports up to 100 W fast charging, so the adapter can handle continuous high-current draw from a soldering iron during extended repair sessions. Heat buildup remains low because the connectors are rated for the full 60 A XT60 specification.
Highlights
- Connect TS100 soldering iron directly to XT60 battery for field repairs
- XT60 male to DC 5.5x2.1mm male enables fast charging from LiPo packs
- SC100 protocol support delivers up to 100 W power for demanding devices
- Compact adapter suits FPV drones, RC vehicles, solar cells and toys
- Male-to-male design eliminates extra cables for quick, secure connections
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What connectors come on the adapter and do I need any extra cables?
The adapter has an XT60 male connector on one end and a DC 5.5 x 2.1 mm male plug on the other; no extra cables are included.
Which version should I pick for a TS100 soldering iron powered from an XT60 battery?
This single XT60 male to DC 5.5 x 2.1 mm male version is built for that exact TS100 and XT60 battery combination.
What does the SC100 label mean when I plug it into a 60 A rated XT60 battery?
SC100 marks the protocol handshake capability; the XT60 connector itself is rated for 60 A continuous current.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



