We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A small yellow XT60 female to EC5 female adapter with short wires

LORDWORLD

LORDWORLD XT60 Female to EC5 Female Adapter

SKU CH-4HYH-7TTK7

Connects XT60 and EC5 battery plugs for drones, FPV gear, TS100 soldering irons and RC models

  • Connect TS100 soldering iron directly to XT60 battery packs
  • Compact EC5 connector separates from balance lead for tight installs
  • Compatible with most LiPo chargers on the market
  • High-temperature resistant materials ensure safe field repairs
  • Plug-and-play design suits FPV drones, solar rigs and RC toys

Connecting TS100 Iron to XT60 Battery

This adapter converts an XT60 female port to an EC5 female socket so a TS100 soldering iron can draw power directly from a LiPo battery. It targets FPV pilots, drone builders and hobbyists who need a quick field-repair solution without carrying a mains supply. The compact split keeps the balanced lead clear of the main power path.

High-Temperature Resistance and Insulation

Materials are chosen for high temperature resistance and good insulation so the connector pair handles sustained current from a 100 A rated XT60 source without softening or shorting. Plug-and-play operation means no soldering or tools are required at the flying field. Normal use stays cool because the contacts are sized for the 60 A continuous rating of the XT60 standard.

Separated EC5 Connector for Compact Builds

The EC5 end is physically separated from the balance lead, reducing overall length and preventing snagging inside tight multirotor frames or vehicle chassis. This layout suits solar-cell test rigs, remote-control toys and any project where space is limited. Builders who need a second power path or a different polarity will need a separate harness because this unit provides a single straight-through conversion.

Highlights

  • Connect TS100 soldering iron directly to XT60 battery packs
  • Compact EC5 connector separates from balance lead for tight installs
  • Compatible with most LiPo chargers on the market
  • High-temperature resistant materials ensure safe field repairs
  • Plug-and-play design suits FPV drones, solar rigs and RC toys

Specifications

BrandLORDWORLD

Questions about this item

How do I connect the XT60 female side to my battery without reversing polarity?

Align the keyed XT60 female housing with the male XT60 output on the battery; the polarised shape only fits one way, so push straight in until the latch clicks.

Will the EC5 contacts need cleaning or replacement after repeated field use?

The gold-plated EC5 pins resist oxidation; wipe with isopropyl alcohol if they look dull, and replace the adapter only if the spring tension feels loose.

At what current does the adapter become the limiting factor during a long soldering session?

The XT60 interface is rated for 60 A continuous, so sustained draws above that will heat the connector first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.