We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 female connector to black DC 7.9x5.4mm female jack adapter

LORDWORLD

LORDWORLD XT60 Female SC100 Protocol to DC 7.9x5.4mm Female Plug Fast Charging Adapter

SKU CH-DSJ0-Q8XN2

XT60 to DC 7.9x5.4mm adapter powers TS100 soldering irons and FPV gear from XT60 batteries

  • XT60 female connector plugs straight into LiPo packs
  • DC 7.9×5.4 mm jack powers TS100 soldering iron in the field
  • SC100 protocol support enables fast charging for compatible gear
  • High-temperature insulation handles sustained loads during FPV sessions
  • Plug-and-play design lets pilots repair multicopters without extra tools

FPV Power Adapter for Field Repairs

This XT60 to DC adapter connects a TS100 soldering iron to a LiPo battery for on-site soldering during FPV multirotor sessions. The plug accepts an XT60 output and provides a 7.9x5.4mm DC barrel socket. High temperature resistance and insulation suit outdoor use. It is built for quick, plug-and-play deployment at the flying field.

Suits Pilots Needing Portable Soldering

FPV pilots who carry a TS100 iron and want battery power for trackside repairs will find this adapter matches their workflow. Builders who need a different barrel size or a higher current rating than the XT60 standard should look elsewhere. Users without an XT60-equipped battery pack cannot use this connector. It does not replace a bench power supply for continuous workshop tasks.

Simple Plug-and-Play Installation

Connect the XT60 female end to the battery and the DC female end to the soldering iron; no tools or soldering are required. The most common issue is a loose barrel fit if the iron's plug tolerances vary, which can interrupt heating. Ensure the XT60 latch seats fully to avoid voltage drop under load. Inspect insulation before each field session.

Highlights

  • XT60 female connector plugs straight into LiPo packs
  • DC 7.9×5.4 mm jack powers TS100 soldering iron in the field
  • SC100 protocol support enables fast charging for compatible gear
  • High-temperature insulation handles sustained loads during FPV sessions
  • Plug-and-play design lets pilots repair multicopters without extra tools

Specifications

BrandLORDWORLD

Questions about this item

What battery connector must I already have to plug this adapter in?

You need a battery or power source with an XT60 male output; the adapter's XT60 female side mates directly with it.

Will the DC 7.9x5.4 mm socket on this adapter accept the barrel plug on my existing TS100 soldering iron?

Yes, the DC female socket is sized at 7.9 mm outer diameter and 5.4 mm inner diameter, matching the TS100's standard barrel jack.

How can I confirm the adapter is passing power correctly after I connect it?

The TS100 soldering iron will power on and begin heating, showing its display or LED indicator, which verifies the XT60-to-DC path is live.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.