We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with four USB ports and gold pogo pins

LORDWORLD

LORDWORLD USB HUB HAT B Development Board 4 Ports USB 2.0/1.1

SKU CH-GJSK-YHXT7

Adds four USB 2.0 or 1.1 ports to Raspberry Pi boards via pogo pins or cable

  • Four USB ports expand Raspberry Pi connectivity
  • Pogo pins connect directly to Zero series boards
  • USB hub connector links Pi 4B, 3B+, 3A+, 2B via cable
  • Supports USB 2.0 and 1.1 devices
  • HAT form factor adds no external footprint

USB HUB HAT B for Raspberry Pi

The LORDWORLD USB HUB HAT B adds four USB ports to Raspberry Pi boards including the Zero, Zero W, Zero WH, 2B, 3A+, 3B+ and 4B. It uses a pogo-pin connector for direct attachment to Zero models and a USB cable link for larger boards. Makers expanding peripheral connectivity for IoT or robotics projects will find it a compact solution.

Passive hub thermals and power

The board draws power from the host Raspberry Pi and adds no active cooling or fans. Normal operation stays silent and generates only the modest heat expected from a USB 2.0 hub. Total current available to attached devices is limited by the Pi's own USB supply capability.

Four USB 2.0 ports

This HAT provides exactly four downstream ports compliant with USB 2.0 and 1.1. It does not support USB 3.0 or higher speeds, so peripherals requiring greater bandwidth will not perform at their rated throughput.

Highlights

  • Four USB ports expand Raspberry Pi connectivity
  • Pogo pins connect directly to Zero series boards
  • USB hub connector links Pi 4B, 3B+, 3A+, 2B via cable
  • Supports USB 2.0 and 1.1 devices
  • HAT form factor adds no external footprint

Specifications

BrandLORDWORLD

Questions about this item

How do I attach the HAT to a Raspberry Pi Zero W using the pogo pins?

Align the pogo-pin header on the HAT with the GPIO pads on the Zero W and press firmly until the pins seat; no soldering is required.

Will the USB ports need any firmware updates or driver maintenance over time?

The hub uses the standard USB 2.0/1.1 interface supported by the Raspberry Pi kernel, so no separate firmware or driver upkeep is needed.

What bandwidth limit appears first when all four ports run high-throughput devices together?

All four ports share a single USB 2.0 upstream link, so total throughput is capped at the USB 2.0 signalling rate.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.