LORDWORLD
LORDWORLD USB C to USB C cable 10FT 10Gbps 100W 4K@60Hz Thunderbolt 3
A 10 ft USB-C cable delivering 10 Gbps data, 100 W charging, and 4K@60 Hz video with Thunderbolt 3 compatibility
- 10 Gbps data speed moves large SSD files in seconds
- 100 W charging with E-Marker chip powers laptops at full speed
- 4K at 60 Hz video output to monitors and projectors
- 2K at 120 Hz high-refresh streaming for smooth visuals
- Thunderbolt 3 compatible and backward compatible with USB 3.1, 3.0, 2.0
10 FT USB-C cable for data, power and display
This ten-foot USB-C to USB-C cable carries 10 Gbps data, 100 W charging and 4K 60 Hz video. A built-in E-Marker chip negotiates safe power delivery for laptops, phones and tablets. It works with Thunderbolt 3 hosts and falls back to USB 3.1, 3.0 and 2.0 ports.
Suits users needing one long cable for docks.
Buyers who want Thunderbolt 4 speeds or 8K video should look elsewhere. The cable does not support higher bandwidth protocols or alternate display modes beyond the stated resolutions.
Plug into any USB-C port for instant operation
No drivers are required for data, charging or video. The only common issue is attempting 4K 60 Hz on a host port that lacks DisplayPort Alt Mode, which results in no picture or a lower refresh rate.
Highlights
- 10 Gbps data speed moves large SSD files in seconds
- 100 W charging with E-Marker chip powers laptops at full speed
- 4K at 60 Hz video output to monitors and projectors
- 2K at 120 Hz high-refresh streaming for smooth visuals
- Thunderbolt 3 compatible and backward compatible with USB 3.1, 3.0, 2.0
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Does my laptop need a USB-C port that supports 100W Power Delivery to charge at full speed with this cable?
Yes, the cable carries up to 100W (5A) via its E-Marker chip, but the host port must also support USB Power Delivery at that level; otherwise charging will fall back to the port's lower limit.
Will the 10Gbps data rate still work if I plug this cable into an older USB 3.0 or USB 2.0 port?
The cable is backward compatible with USB 3.1, 3.0 and 2.0 ports, so it will function, but the transfer speed will drop to the maximum rate of the older port.
How can I confirm the cable is delivering a 4K@60Hz signal to my monitor after I connect it?
Check your display settings to verify the output resolution reads 3840×2160 at 60Hz; if the monitor shows that mode without flicker or scaling issues, the video link is operating as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



