LORDWORLD
LORDWORLD USB-C PD 100W to DC 5.0x1.0mm 90° Adapter with LED Display
USB-C PD 100W adapter converts to DC 5.0x1.0mm 90° barrel with real-time LED voltage, current and power display
- Real-time voltage, current and power readout via LED display
- Up to 100 W (20 V / 5 A) delivered to DC 5.0 × 1.0 mm devices
- Works with 65 W and 18.5–20.5 V sources when paired with 100 W charger and cable
- 90° angled barrel plug fits tight spaces around laptop ports
- Alloy shell protects connector while keeping adapter compact and plug-and-play
USB-C PD 100W to DC Adapter
This adapter converts a USB-C Power Delivery source into a DC 5.0x1.0mm barrel output for laptops and other devices that use that connector. It accepts up to 100W input and delivers a maximum of 20V at 5A, with support for 65W and a voltage range of 18.5V to 20.5V. The 90-degree angled plug fits tight spaces around the port.
LED Display and PD Trigger
A built-in LED digital display shows real-time voltage, current and power so you can monitor the charging status at a glance. The USB-C male end includes a 100W PD emulator trigger that negotiates the required power profile automatically. No extra software or drivers are needed for operation.
Check Charger and Cable Rating
To reach the 100W output, both the USB-C charger and the cable must be rated for 100W or higher; lower-rated accessories will limit the power delivered. Verify that your laptop’s DC input jack matches the 5.0mm outer and 1.0mm inner diameter before ordering. The adapter is designed for barrel-jack devices only.
Highlights
- Real-time voltage, current and power readout via LED display
- Up to 100 W (20 V / 5 A) delivered to DC 5.0 × 1.0 mm devices
- Works with 65 W and 18.5–20.5 V sources when paired with 100 W charger and cable
- 90° angled barrel plug fits tight spaces around laptop ports
- Alloy shell protects connector while keeping adapter compact and plug-and-play
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Will the 5.0x1.0 mm DC barrel tip wear out and need replacement?
The alloy shell protects the plug, but the tip itself is a fixed metal barrel; if the centre pin bends or the sleeve loosens, the whole adapter must be replaced.
What limits continuous 100 W output before the adapter throttles?
The 20 V 5 A PD trigger is rated for 100 W max; sustained load at that level is limited by the source charger’s thermal budget and cable voltage drop.
Does the LED display or the 90 ° angled plug add noticeable heat or fan noise during all-day use?
The adapter has no fan; the display draws only a few milliwatts, and the alloy shell passes warmth from the PD circuitry without active cooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



