LORDWORLD
LORDWORLD USB-C PD 100W to DC 4.5x3.0mm 90° LED Display Adapter
A USB-C PD adapter with a 90-degree DC 4.5x3.0mm plug and LED display delivers up to 100W at 20V 5A for compatible laptops
- Real-time voltage, current and power readout on built-in LED display
- 90° angled DC plug fits tight spaces beside laptop ports
- Delivers up to 100 W at 20 V 5 A from a USB-C PD source
- Works with QC 2.0, QC 3.0 and USB PD chargers for broad compatibility
- Compact alloy shell, plug-and-play design for easy travel
What it is and who it fits
This USB-C to DC adapter converts a 100 W Power Delivery source into a 4.5 x 3.0 mm barrel output for compatible HP laptops. A built-in LED screen shows live voltage, current and power so you can verify the charge rate at a glance. The 90-degree plug eases connection in tight port clearances.
Sustained-load behaviour
The unit passes up to 20 V at 5 A continuously when the upstream charger and cable are rated for 100 W or more. It also negotiates 65 W and voltages between 18.5 V and 20.5 V for lower-power scenarios. The alloy housing dissipates heat without active cooling during extended sessions.
Check before ordering
Confirm your laptop uses a 4.5 x 3.0 mm DC input and accepts 20 V operation. Ensure the USB-C power supply and cable are both rated for at least 100 W to reach the maximum output. The adapter requires a PD or QC 2.0/3.0 source and will not work with plain USB-A ports.
Highlights
- Real-time voltage, current and power readout on built-in LED display
- 90° angled DC plug fits tight spaces beside laptop ports
- Delivers up to 100 W at 20 V 5 A from a USB-C PD source
- Works with QC 2.0, QC 3.0 and USB PD chargers for broad compatibility
- Compact alloy shell, plug-and-play design for easy travel
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Does the adapter get hot or draw extra power when running at the full 100W 20V 5A rating all day?
The alloy shell helps dissipate heat during continuous 100W 20V 5A operation, and the built-in PD trigger only requests the power your laptop actually needs.
What charger and cable must I already own to get 100W through the 4.5×3.0 mm barrel plug?
You need a USB-C charger and cable each rated for 100W or higher; the adapter negotiates 20V 5A via its internal PD trigger.
Will this work with my older HP laptop that shipped with a 65W or 18.5–20.5V barrel adapter?
Yes — the adapter also supports 65W and the 18.5 V to 20.5 V range, so it can replace the original barrel supply on compatible HP models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
