LORDWORLD
LORDWORLD USB-C PD 100W to DC 4.5x3.0mm 90° Adapter with LED Display
USB-C PD adapter converts up to 100W input to a 90-degree DC 4.5x3.0mm barrel jack with real-time voltage, current and power display
- Real-time power monitoring via LED voltage, current and power display
- 100 W maximum delivery at 20 V 5 A with PD and QC 2.0/3.0 support
- 90° angled DC 4.5×3.0 mm plug fits tight spaces
- Alloy shell protects connector for durable daily use
- Plug-and-play design requires no drivers or configuration
USB-C PD 100W to 4.5x3.0mm DC Adapter
The LORDWORLD adapter converts a USB-C Power Delivery source into a 4.5x3.0mm barrel output for compatible laptops. It accepts up to 100W input and delivers a maximum of 20V at 5A through the angled plug. A built-in LED display shows real-time voltage, current and power. The alloy shell protects the connector during daily use.
Who this suits and who should look elsewhere
This suits owners of Dell or similar laptops that charge via a 4.5x3.0mm DC jack and want to use a USB-C PD charger. It is not for devices needing a different barrel size, higher voltage than 20.5V or more than 100W. Buyers without a 100W-rated USB-C charger and cable will not reach the maximum output.
The specification that decides compatibility
The critical detail is the 4.5x3.0mm DC male output plug delivering a fixed 20V at up to 5A. If your laptop requires that exact barrel size and voltage, the adapter works; if the port size or voltage differs, it will not fit or charge correctly.
Highlights
- Real-time power monitoring via LED voltage, current and power display
- 100 W maximum delivery at 20 V 5 A with PD and QC 2.0/3.0 support
- 90° angled DC 4.5×3.0 mm plug fits tight spaces
- Alloy shell protects connector for durable daily use
- Plug-and-play design requires no drivers or configuration
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
How much clearance does the 90-degree angled DC 4.5x3.0mm plug need beside my laptop port?
The 90° bend lets the cable run parallel to the chassis, so only a few millimetres of side clearance are required — ideal for tight corners or docked setups.
What charger spec must I use so the adapter can deliver its full 100W 20V 5A output?
Use a USB-C PD charger and cable rated for 100W or higher; the built-in PD trigger requests 20V 5A only when the source advertises that capability.
Does the LED display draw enough power to shorten the adapter's lifespan?
The display is powered directly from the PD negotiation circuit and consumes negligible current, so it does not reduce the adapter's operating life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



