We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A compact USB-C female to XT30 male adapter with a dark finish

LORDWORLD

LORDWORLD USB-C 100W PD to XT30 Male Adapter

SKU CH-RR6N-2WYTW

Converts USB-C 100W PD power to XT30 output at 5.0-20.0V 5.0A for RC LiPo batteries and quadcopters

  • USB-C input accepts up to 100W via PD 2.0 3.0 and QC 2.0
  • XT30 male output delivers adjustable 5.0 to 20.0V at up to 5.0A
  • Powers 100W RC LiPo quadcopters when voltage and current match the load
  • Works with iSDT, GT Power, Hota RC chargers and any XT60-input charger
  • Plug-and-play for XT30 batteries, vehicles, RC toys, multicopters and aeromodelling

USB-C PD to XT30 adapter for RC charging

This adapter converts a USB-C Power Delivery source into an XT30 male output for charging RC LiPo batteries. It accepts up to 100W at 20V and 5A using PD 2.0, PD 3.0 or QC 2.0 protocols. The output delivers 5.0 to 20.0V at a maximum of 5.0A. It suits quadcopter pilots and aeromodelling hobbyists who want to charge packs from a compatible USB-C charger.

Thermals noise and power draw in normal use

The unit has no fan and produces no audible noise during operation. Heat dissipation relies on the adapter body and the connected cables. Power draw matches the attached battery and charger combination, up to the 100W input limit. Users must verify that their device voltage and current ratings fall within the 5.0 to 20.0V and 5.0A output range to avoid damage.

Behaviour under sustained load

Continuous charging at the full 100W rating depends on the USB-C source maintaining 20V at 5A without throttling. The adapter passes power directly, so sustained output follows the source capability and the battery charge curve. It works with popular brands such as iSDT, GT Power and Hota RC, plus any charger with XT60 input via a separate lead. Not suited for devices needing voltages outside the 5.0 to 20.0V window or currents above 5.0A.

Highlights

  • USB-C input accepts up to 100W via PD 2.0 3.0 and QC 2.0
  • XT30 male output delivers adjustable 5.0 to 20.0V at up to 5.0A
  • Powers 100W RC LiPo quadcopters when voltage and current match the load
  • Works with iSDT, GT Power, Hota RC chargers and any XT60-input charger
  • Plug-and-play for XT30 batteries, vehicles, RC toys, multicopters and aeromodelling

Specifications

BrandLORDWORLD

Questions about this item

How do I connect the USB-C PD charger to the XT30 male plug without reversing polarity?

Plug the USB-C cable into the adapter first, confirm the charger negotiates 20 V at up to 5 A, then insert the XT30 male into the battery or charger — the keyed XT30 housing prevents reverse insertion.

Will the XT30 connector or the USB-C port wear out first with daily charging cycles?

The XT30 male pins are rated for frequent mating cycles in RC use; the USB-C female port is similarly durable, so neither shows a clear wear advantage under normal daily charging.

At what power level does the adapter hit its thermal limit during a continuous 100 W charge?

The adapter is specified for 100 W at 20 V and 5 A; sustained operation at that maximum output will reach its thermal design limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.