We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact USB-C plug to XT30 connector adapter, matte black plastic body, short cable tail

LORDWORLD

LORDWORLD USB-C 100W PD to XT30 Adapter

SKU CH-M8F0-SRSGM

Converts USB-C PD input into adjustable 5.0-20.0V XT30 output for RC batteries and chargers up to 100W

  • Delivers up to 100W via USB-C PD 3.0 for fast RC charging
  • Adjustable 5.0‑20.0V output matches diverse battery voltage requirements
  • XT30 connector fits iSDT, GT Power, Hota and other popular chargers
  • Flame‑retardant housing protects against heat during high‑current sessions
  • Compact, lightweight design slips easily into a field kit

USB-C 100W PD to XT30 Adapter

The LORDWORLD adapter converts a USB-C Power Delivery source into an XT30 output for RC batteries and vehicles. It accepts 100W at 20V using PD 2.0, PD 3.0 and QC 2.0 protocols and delivers 5.0 to 20.0V at up to 5.0A. The unit targets hobbyists who charge LiPo packs with XT30-equipped chargers.

Plug-and-play connection with voltage verification

Installation is a direct plug into the USB-C source and the XT30 charger input. No drivers or configuration are required. The critical step is confirming that the connected battery and charger match the 5.0 to 20.0V and 5.0A limits; exceeding those ratings can damage the device.

For RC pilots using XT30 chargers

This suits pilots who want to field-charge quadcopters, multicopters or other XT30 vehicles from a 100W PD power bank or wall adapter. It does not suit users whose chargers need a different connector, higher current than 5.0A, or voltages outside the 5.0 to 20.0V range.

Highlights

  • Delivers up to 100W via USB-C PD 3.0 for fast RC charging
  • Adjustable 5.0‑20.0V output matches diverse battery voltage requirements
  • XT30 connector fits iSDT, GT Power, Hota and other popular chargers
  • Flame‑retardant housing protects against heat during high‑current sessions
  • Compact, lightweight design slips easily into a field kit

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the adapter is delivering the correct voltage to my XT30 charger after connecting a USB-C PD source?

The adapter outputs 5.0 to 20.0V at up to 5.0A via the XT30 connector when a compliant USB-C PD 2.0, PD 3.0 or QC 2.0 source provides 20V at 5A; verify with a multimeter or charger telemetry that the expected voltage appears under load.

What comes in the package and do I need any extra cables or connectors to use it with my iSDT or Hota RC charger?

The package contains the USB-C male to XT30 male adapter only; you must supply a USB-C PD charger or power bank capable of 20V 5A and your charger with an XT30 input — no additional cables are included.

Which USB-C power source specification should I select to safely run a 100W RC LiPo battery charger through this adapter?

Choose a USB-C PD 2.0, PD 3.0 or QC 2.0 charger or power bank rated for 20V at 5A (100W) so the adapter can deliver the full 5.0A maximum through the XT30 output without triggering protection or damaging your equipment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.