We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat USB-C internal cable with 12cm PCIe bracket, 50cm flexible FPC ribbon, Type-E motherboard connector

LORDWORLD

LORDWORLD USB 3.2 Gen 2x2 20Gbps Type-E Cable 50cm 12cm Bracket

SKU CH-Z3F6-K5YJJ

Adds a front-panel USB-C connector running at 20 Gbps with a 50 cm FPC cable and 12 cm PCIe bracket

  • 20 Gbps data speed for fast SSD transfers
  • 50 cm cable with 12 cm PCIe bracket fits tight cases
  • FPC construction makes the cable thin and flexible
  • Supports 5 V / 3 A charging while the device is in use
  • USB 3.2 Gen 2x2 Type-E header connects to motherboard

Front-panel USB 20 Gbps adapter

This adapter connects a front-panel USB Type-C header to a motherboard USB Type-E connector, adding a 20 Gbps USB 3.2 Gen 2x2 port to a PC case. It is aimed at builders who want high-speed external storage access without opening the chassis. The 50 cm flat cable and 12 cm PCIe bracket fit standard ATX layouts. It does not carry video, audio, docking or Power Delivery signals.

Sustained transfer with FPC construction

The cable uses flexible printed-circuit traces wrapped in a TPE sheath instead of round copper wires, reducing bulk and allowing tight bends inside a crowded case. This construction maintains the 20 Gbps data rate during long file moves from SSDs or HDDs rather than only in short bursts. The flat profile also improves airflow compared with thicker cables. Maximum device charging is limited to 5 V at 3 A.

USB 3.2 Gen 2x2 interface limits

The Type-E link tops out at 20 Gbps, exactly twice the 10 Gbps ceiling of USB 3.1, but it cannot negotiate higher speeds or alternate modes such as DisplayPort. Power delivery negotiation is absent, so connected devices draw only the standard 5 V supply. Builders needing video output, docking or higher wattage charging must use a different header and cable combination.

Highlights

  • 20 Gbps data speed for fast SSD transfers
  • 50 cm cable with 12 cm PCIe bracket fits tight cases
  • FPC construction makes the cable thin and flexible
  • Supports 5 V / 3 A charging while the device is in use
  • USB 3.2 Gen 2x2 Type-E header connects to motherboard

Specifications

BrandLORDWORLD

Questions about this item

Does the 20Gbps Type-E cable generate noticeable heat or draw extra power when running all day?

The cable uses flexible FPC lines with a TPE jacket and carries a maximum of 5V/3A for charging, so it stays cool and adds negligible power draw during continuous use.

What must my motherboard already have for this 50cm Type-E adapter with its 12cm PCIe bracket to work?

Your motherboard needs a USB 3.2 Gen 2x2 front-panel header (Type-E keying) to plug the cable into; the bracket simply screws into a standard rear expansion slot.

Will this 20Gbps Type-E cable work correctly alongside my older USB 3.1 10Gbps ports and devices?

Yes — the cable negotiates the highest speed both ends support, so it runs at 20Gbps with Gen 2x2 gear and falls back to 10Gbps on USB 3.1 ports without any setup.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.