We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular adapter with USB Type-E socket and 20-pin header, black PCB

LORDWORLD

LORDWORLD USB 3.1 Type-E to USB 3.0 20-Pin Adapter with CH334P

SKU CH-9XJY-AHGEX

Converts a motherboard USB 3.1 Type-E header to a 20-pin USB 3.0 header using a CH334P controller for 20Gbps data

  • Add front-panel USB 3.1 Type-E to any desktop motherboard
  • Supports 20 Gbps data from SSD or HDD storage devices
  • Converts existing USB 3.0 20-pin header to Type-E connector
  • Uses CH334P controller for plug-and-play operation
  • No extra cables or power adapters required for installation

Front-panel header adapter for desktop builds

This adapter converts a motherboard USB 3.1 Type-E header into a standard USB 3.0 20-pin header. It is designed for PC builders who need to connect a front-panel USB 3.0 port to a newer motherboard that only provides the Type-E connector. The compact unit plugs directly into the board without cables or extra brackets. It uses the CH334P controller to manage the signal conversion.

Type-E to 20-pin conversion with CH334P

The single specification that determines compatibility is the header conversion direction: Type-E female on the motherboard side to USB 3.0 20-pin male for the front panel. The CH334P chip enables this translation so the front-panel ports function at USB 3.1 speeds. If your motherboard already has a native 20-pin header, this adapter is not required. It also does not add a Type-E port to a board that lacks one.

20Gbps data throughput for storage devices

The adapter supports up to 20Gbps USB data transfer when used with compatible SSDs or HDDs connected to the front panel. This bandwidth handles fast external drives and high-speed flash drives without bottlenecking the USB 3.1 Gen 2 link. It does not carry video, audio, docking signals or Power Delivery, so it cannot drive monitors or charge devices via DP alt mode. Headroom ends at the 20Gbps ceiling and the lack of alt-mode support.

Highlights

  • Add front-panel USB 3.1 Type-E to any desktop motherboard
  • Supports 20 Gbps data from SSD or HDD storage devices
  • Converts existing USB 3.0 20-pin header to Type-E connector
  • Uses CH334P controller for plug-and-play operation
  • No extra cables or power adapters required for installation

Specifications

BrandLORDWORLD

Questions about this item

What does the 20Gbps rating mean when I connect an SSD or HDD to this adapter?

The 20Gbps figure is the maximum USB 3.1 data rate the Type-E port can carry for SSD or HDD traffic; it does not apply to audio, video, docking, Power Delivery or DisplayPort alt mode.

Which USB header standard does the 20-pin side use and what speed does that cap me at?

The 20-pin connector fits a standard USB 3.0 motherboard header, so the link is limited to USB 3.0 speeds even though the Type-E side supports USB 3.1 and 3.2.

What physical header on my motherboard must be free for this adapter to plug in?

You need an available USB 3.0 20-pin header on the motherboard; the adapter plugs directly into that header without extra cables or brackets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.