We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular adapter with USB Type-E port and 20-pin header, black PCB, silver connectors

LORDWORLD

LORDWORLD USB 3.1 Type-E to 20-Pin Header Adapter CH334P 10Gbps

SKU CH-CGC1-0RPR3

Converts a motherboard USB 3.1 Type-E port to a 20-pin header at 10 Gbps while splitting one USB 2.0 lane into two via CH334P chipset

  • Connect SSD or HDD at 10 Gbps via Type-E port
  • Convert motherboard USB-E female to 3.2 or 3.1 header
  • CH334P chip splits one 2.0 lane into two for dual 2.0 devices
  • Turn 3.1 header into 20-pin 3.0 header for front-panel use
  • Compact plug-in design fits any 3.0 header with no extra parts

USB 3.1 Type-E to 20-Pin Header Adapter

This adapter converts a motherboard USB 3.1 Type-E header into a standard 20-pin USB 3.0 front-panel connector. It is designed for PC builders who need to connect a chassis USB 3.0 port to a newer motherboard header. The compact unit plugs directly into the board without extra cables or brackets. It uses a CH334P chipset to manage the signal conversion.

Interface limits and signalling

The Type-E port carries a single USB 2.0 lane; the onboard CH334P chipset splits this into two lanes so two USB 2.0 devices can operate simultaneously on the 19- or 20-pin header. Data throughput reaches 10 Gbps for USB 3.1 and 3.2 traffic from attached SSDs or HDDs. The adapter does not carry audio, video, docking, Power Delivery or DisplayPort Alternate Mode signals.

Motherboard header and device check

Verify that your motherboard provides a USB 3.1 Type-E female header before ordering. Confirm the chassis front-panel connector uses the 19-pin or 20-pin USB 3.0 layout. Ensure you do not require video, docking or Power Delivery functions through this connection, as those are not supported.

Highlights

  • Connect SSD or HDD at 10 Gbps via Type-E port
  • Convert motherboard USB-E female to 3.2 or 3.1 header
  • CH334P chip splits one 2.0 lane into two for dual 2.0 devices
  • Turn 3.1 header into 20-pin 3.0 header for front-panel use
  • Compact plug-in design fits any 3.0 header with no extra parts

Specifications

BrandLORDWORLD

Questions about this item

What does the CH334P chipset do with the single USB 2.0 lane from the Type-E port?

It splits the single USB 2.0 lane into two lanes on the 19-pin or 20-pin header so two USB 2.0 devices can run at the same time.

What real-world speed can I expect from the 10Gbps Type-E port when I connect an SSD or HDD?

The port delivers up to 10Gbps of raw USB data bandwidth for storage drives; it does not carry video, audio, docking or Power Delivery signals.

Which motherboard header does the 20-pin connector fit, and what USB standard does it enable?

The 20-pin plug fits any standard USB 3.0 front-panel header and lets the board's USB 3.1 or 3.2 Type-E port drive that header at up to 10Gbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.