We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular adapter with a USB Type-E port on one end and a 20-pin header on the other, black plastic housing

LORDWORLD

LORDWORLD USB 3.1 Type-E to 20/19-Pin Adapter CH334P

SKU CH-RYCF-W6K8X

Converts a motherboard USB Type-E port to 19-pin and 20-pin headers, splitting one USB 2.0 lane into two and supporting 10Gbps data

  • Connect two USB 2.0 devices simultaneously
  • CH334P chipset splits one lane into two
  • Convert motherboard USB-E to 3.2/3.1 header
  • Plug directly into any USB 3.0 19/20-pin header
  • 10 Gbps data transfer for SSD/HDD storage

Front-panel USB adapter for motherboard headers

This LORDWORLD adapter converts a motherboard USB Type-E port into a 19-pin or 20-pin header so you can add front-panel USB 3.0 or USB 3.1 connectivity. The onboard CH334P chipset splits the single USB 2.0 lane into two lanes, letting you run two USB 2.0 devices simultaneously. It plugs directly into the header with no extra cables or brackets required. Data rates reach 10Gbps for USB 3.1 and 3.2 devices.

Builders adding front USB ports to a Type-E

Suits PC builders whose motherboard exposes only a Type-E connector but whose case provides a 19-pin or 20-pin front-panel cable. The adapter bridges that gap and keeps USB 3.1 or 3.2 speeds intact. Not for users who need video, audio or DisplayPort alt-mode signals over the same port. Also unsuitable if your case front panel requires Power Delivery charging or docking-station features, because the adapter passes data only.

Check motherboard header type and case cable pinout

Verify that your motherboard has a USB Type-E female header and that your case front-panel cable ends in a 19-pin or 20-pin USB 3.0 connector. The adapter does not convert to other header styles, so a mismatch will leave the front ports dead. Confirm you only need USB data up to 10Gbps; the device does not carry video, audio, DP alt mode or PD power. No driver install is mentioned for the CH334P chipset.

Highlights

  • Connect two USB 2.0 devices simultaneously
  • CH334P chipset splits one lane into two
  • Convert motherboard USB-E to 3.2/3.1 header
  • Plug directly into any USB 3.0 19/20-pin header
  • 10 Gbps data transfer for SSD/HDD storage

Specifications

BrandLORDWORLD

Questions about this item

What motherboard header do I need free to plug this CH334P adapter in?

You need an available USB 3.1 Type-E female header on the motherboard.

Will my existing USB 3.0 19-pin front-panel cable work with this adapter?

Yes, the adapter converts the Type-E port to a USB 3.0 19-pin or 20-pin header for that cable.

How can I confirm the adapter is delivering the rated 10 Gbps after installation?

Connect an SSD or HDD to the front panel and verify the link negotiates 10 Gbps in the OS device manager.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.