We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCIe card with dual USB-C ports and internal headers

LORDWORLD

LORDWORLD USB 3.1 Type-E & Dual Type-C PCIe Adapter ASM3142 VL822

SKU CH-3GMC-V1F9Q

PCIe card adds a USB 3.1 Type-E front-panel header, one 19-pin or 20-pin USB 3.0 header and two Type-C ports at 10 Gbps using ASM3142 and VL822 controllers without extra power

  • 10 Gbps data transfer backed by ASM3142 and VL822 dual chipset
  • Adds a Type-E front-panel header so a case USB 3.1 port works without motherboard support
  • Dual Type-C ports plus 19-pin and 20-pin headers expand front-panel connectivity
  • Operates without an extra power cable thanks to a built-in self-powered IC
  • Supports USB 3.1, 3.0, 2.0 and 1.1 speeds down to 1.5 Mbps

USB 3.1 Type-E front-panel adapter

This PCIe add-in card adds a USB 3.1 Type-E header plus two Type-C ports and a 19-pin/20-pin USB 3.0 header to a desktop build. It targets builders whose motherboard lacks a native Type-E connector but whose case provides front-panel USB 3.1 ports. The dual-chipset design uses ASM3142 and VL822 controllers to deliver the stated 10 Gbps data rate.

Fits a spare PCIe slot without extra power

The card draws all required power from the PCIe slot itself thanks to an onboard self-powered IC, so no auxiliary cable or external supply is needed. It converts one expansion slot into three separate front-panel connections, freeing the builder from hunting for a board with a specific header layout. Compatibility rests on an available PCIe lane and a case equipped with matching front-panel cables.

Sustained throughput via Multiple INs

Under continuous load the ASM3142 controller employs its Multiple INs feature to keep the 10 Gbps pipe fully utilised rather than falling back to burst-only speeds. The VL822 hub controller manages the two Type-C ports and the legacy header simultaneously, maintaining backward compatibility with USB 2.0 at 480 Mbps and USB 1.1 at 1.5 Mbps without a separate power phase.

Highlights

  • 10 Gbps data transfer backed by ASM3142 and VL822 dual chipset
  • Adds a Type-E front-panel header so a case USB 3.1 port works without motherboard support
  • Dual Type-C ports plus 19-pin and 20-pin headers expand front-panel connectivity
  • Operates without an extra power cable thanks to a built-in self-powered IC
  • Supports USB 3.1, 3.0, 2.0 and 1.1 speeds down to 1.5 Mbps

Specifications

BrandLORDWORLD

Questions about this item

What is the maximum sustained data rate the ASM3142 chipset can maintain on this adapter?

The ASM3142 chipset supports the USB 3.1 Gen 2 Multiple INs feature to fully utilise the 10 Gbps bus bandwidth under sustained load.

Does the card require an external power connector when all ports run continuously?

No, the adapter includes a built-in self-powered IC so no extra power supply is needed even during all-day operation.

Which motherboard header must be present to use the front-panel Type-E socket?

Your motherboard needs a USB 3.0 19-pin or 20-pin header to connect the supplied cable for the Type-E front-panel socket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.