We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short USB-C to USB-A OTG cable with straight connectors, 30 cm

LORDWORLD

LORDWORLD USB 3.1 Type-C to USB 3.0-A OTG Cable 30cm

SKU CH-WYY8-8NP5N

Connects USB-C laptops, tablets or phones to USB 3.0-A 2.5" hard drives via 30 cm OTG cable

  • OTG function connects USB-C host devices to USB 3.0-A peripherals
  • 30 cm cable length suits tight desk or bag setups
  • Directional design ensures correct host-to-device orientation every time
  • Links laptops, tablets or phones to 2.5" USB-A hard drives
  • USB 3.1 Type-C male to USB 3.0-A male connectors enable fast data transfer

What this cable does

The LORDWORLD cable links a USB-C host such as a laptop, tablet or phone to a standard USB 3.0-A device. Its 30 cm length keeps the connection tidy on a desk or in a bag. The OTG function enables direct access to a 2.5 inch hard drive without a separate power adapter. The USB-C plug must be the host side; the cable cannot be reversed.

Sustained transfer behaviour

Data moves at USB 3.1 Gen 1 speeds up to 5 Gbps when both ends support the standard. The short 30 cm run minimises signal loss during long copies or backups. Performance stays consistent because there is no active circuitry to throttle under load. The fixed host-to-device orientation prevents accidental misconnection that would halt the transfer.

Thermals noise and power

Passive copper conductors generate no audible noise and add negligible heat to the system. The cable draws bus power only, so it does not increase the host's power budget in any measurable way. No fan, LED or active component is present to create warmth or sound. The compact form factor leaves adjacent ports unobstructed.

Highlights

  • OTG function connects USB-C host devices to USB 3.0-A peripherals
  • 30 cm cable length suits tight desk or bag setups
  • Directional design ensures correct host-to-device orientation every time
  • Links laptops, tablets or phones to 2.5" USB-A hard drives
  • USB 3.1 Type-C male to USB 3.0-A male connectors enable fast data transfer

Specifications

BrandLORDWORLD

Questions about this item

Will the cable get warm or draw noticeable power when I leave a 2.5" drive plugged in all day?

The cable is a passive 30 cm link with no active electronics, so it adds no measurable heat or power draw beyond what the drive itself requires.

My laptop only has a USB-C port — do I need any adapter or driver for this cable to work with a standard USB-A 2.5" hard drive?

No extra adapter or driver is needed; the USB-C male end plugs directly into the host port and the USB-A male end accepts the drive, provided the host supports USB OTG.

I still use a USB 2.0 flash drive — will it work reliably through this USB 3.1 Gen 1 cable?

Yes, the cable is backward compatible with USB 2.0 devices, so a USB 2.0 flash drive will function at its native speed when connected via the USB-A end.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.