We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
LORDWORLD USB-C to DC 20V 3.0x1.1mm 90-degree angled adapter

LORDWORLD

LORDWORLD USB 3.1 Type C to DC 20V 3.0x1.1mm 90 Degree Angled Adapter

SKU CH-40Y0-QG4MX

Converts a USB-C source to a 20 V DC barrel plug with a 3.0 mm by 1.1 mm tip and 90 degree angled connector

  • USB 3.1 interface enables fast data transfer
  • 20 V output powers compatible laptops and devices
  • 90 degree angled plug reduces strain on ports
  • 0 × 1.1 mm barrel fits matching DC jacks
  • Trigger emulator negotiates correct voltage automatically

Power Delivery Trigger

This angled adapter converts a USB 3.1 Type C source into a 20 volt DC output using a 3.0 by 1.1 millimetre barrel plug. It suits users who need to power compatible laptops or devices from a USB-C power delivery charger or power bank. The 90 degree bend keeps the cable close to the chassis in tight spaces. No driver installation is required for operation.

Thermal And Power Behaviour

The unit draws power only when a PD negotiation succeeds at the 20 volt profile. Under normal load it runs cool to the touch with no audible noise because it contains no moving parts. Power loss is limited to the conversion efficiency of the internal trigger circuit. The adapter does not generate heat that would require active cooling.

Build Integration

The 90 degree connector frees up lateral clearance around crowded ports on thin laptops or docks. It requires a USB-C host that supports Power Delivery at 20 volts and a device with a matching 3.0 by 1.1 millimetre DC input. The adapter adds no software overhead and leaves adjacent ports accessible. Users must verify their charger negotiates the correct voltage before connecting.

Highlights

  • USB 3.1 interface enables fast data transfer
  • 20 V output powers compatible laptops and devices
  • 90 degree angled plug reduces strain on ports
  • 0 × 1.1 mm barrel fits matching DC jacks
  • Trigger emulator negotiates correct voltage automatically

Specifications

BrandLORDWORLD

Questions about this item

How do I install the USB 3.1 Type C to DC 20V adapter and which step is often missed?

Plug the USB-C end into a PD-capable port that negotiates 20 V, then insert the 3.0x1.1 mm barrel into the device; the step people skip is confirming the source actually delivers 20 V before connecting.

What maintenance or replacement will the 90-degree angled adapter need over time?

Inspect the angled joint and barrel tip periodically for bent pins or loosened strain relief; replace the unit if the connector wobbles or shows visible deformation.

What limit appears first when the adapter runs continuously at 20 V?

The 90-degree bend concentrates heat and mechanical stress, so the cable junction typically reaches its thermal or flex limit before the electrical rating does.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.