LORDWORLD
LORDWORLD USB 3.1 Type-C Female to DC 12V 5.5x2.1mm Adapter PD Trigger 90 Degree Angled
Converts a USB-C 65W PD charger into a 12V 5.5×2.1mm DC power source for laptops with an angled plug
- Charge laptops from a 65 W USB-C charger using the built-in 12 V PD trigger
- 90-degree angled DC plug fits tight spaces without stressing the port
- Fixed 12 V output prevents accidental voltage mismatch on 5.5 x 2.1 mm barrel devices
- USB 3.1 Type-C female input accepts standard PD chargers for wide compatibility
- Single adapter replaces bulky proprietary power bricks for travel or desk setups
USB-C PD trigger for 12 V barrel charging
This adapter converts a USB-C Power Delivery source into a 12 V DC output using a 5.5 × 2.1 mm barrel plug. It is intended for users who want to power or charge a laptop that only accepts a 12 V barrel jack from a 65 W USB-C charger. The built-in PD trigger negotiates the fixed 12 V profile automatically.
Thermals noise and power draw
The unit draws up to 65 W from the USB-C charger and passes 12 V to the barrel connector. It does not negotiate 5 V, 9 V, 15 V or 20 V profiles. No active cooling is present, so heat dissipation relies on the small plastic housing during normal operation.
Angled connector and daily use
The 90 degree angled barrel plug reduces strain on the laptop's DC jack and keeps the cable close to the chassis. A USB-C female port accepts the charger cable, while the fixed barrel plug connects directly to the device. The adapter only works with chargers that support the 12 V PDO at 65 W.
Highlights
- Charge laptops from a 65 W USB-C charger using the built-in 12 V PD trigger
- 90-degree angled DC plug fits tight spaces without stressing the port
- Fixed 12 V output prevents accidental voltage mismatch on 5.5 x 2.1 mm barrel devices
- USB 3.1 Type-C female input accepts standard PD chargers for wide compatibility
- Single adapter replaces bulky proprietary power bricks for travel or desk setups
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
How do I connect the 90-degree angled DC plug to my laptop's 5.5x2.1mm port?
Insert the Type-C female end into a 65W PD charger, then plug the right-angled 5.5x2.1mm DC male connector into the laptop's DC 12V input; the angled body clears tight rear-panel spaces.
Will the built-in 12V PD trigger chip need firmware updates or replacement over time?
The trigger is a fixed-function hardware emulator with no programmable firmware; it requires no updates and has no user-replaceable parts.
What happens if I keep drawing the full 65W through the adapter for hours?
The adapter is rated for 12V output only; sustained loads at the charger's 65W limit will heat the trigger circuit, and thermal throttling of the source charger is the first practical limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
