We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 50cm cable with USB 3.1 header plug and USB 3.0 Type-A socket

LORDWORLD

LORDWORLD USB 3.1 Header to USB 3.0 Type-A Female Cable 50cm

SKU CH-MZ66-2QHSG

Connects a motherboard USB 3.1 header to a USB 3.0 Type-A port with a 50cm panel-mount cable

  • Connect USB 3.0 devices to a USB 3.1 front-panel header
  • 50 cm cable reaches front-panel ports in most mid-tower cases
  • Type-A female port accepts standard USB 3.0 plugs
  • Panel-mount design secures the connector to the case cutout
  • Bridges the different header pin-out between USB 3.1 and USB 3.0

USB 3.1 header to USB 3.0 Type-A adapter

This cable bridges a motherboard USB 3.1 front-panel header to a standard USB 3.0 Type-A female port. It lets builders connect a legacy front-panel USB 3.0 connector or device to a newer header. The 50 cm length suits typical chassis routing from header to front panel. It is aimed at PC assemblers upgrading or repairing front-panel connectivity.

Passive cable with no active cooling or power draw

The assembly is a passive copper cable, so it adds no heat, noise or extra power consumption to the system. Signal integrity depends on the host controller and cable quality. No external power adapter is required. Normal use stays within the USB 3.0 signalling envelope.

Panel-mount female Type-A with 50 cm tail

The USB 3.0 Type-A female end is designed for panel mounting, securing the port to a case cut-out. The 50 cm tail reaches most motherboard header locations in mid-tower builds. Builders who need a longer run or a different mounting style will need an alternative solution. The connector pairing is fixed: USB 3.1 header male to USB 3.0 Type-A female.

Highlights

  • Connect USB 3.0 devices to a USB 3.1 front-panel header
  • 50 cm cable reaches front-panel ports in most mid-tower cases
  • Type-A female port accepts standard USB 3.0 plugs
  • Panel-mount design secures the connector to the case cutout
  • Bridges the different header pin-out between USB 3.1 and USB 3.0

Specifications

BrandLORDWORLD

Questions about this item

How do I install the USB 3.1 front panel header to USB 3.0 Type-A female cable and what step is often missed?

Connect the USB 3.1 front panel header to the motherboard header, then secure the Type-A female panel mount to the chassis; the step often missed is confirming the motherboard has a USB 3.1 header, not a USB 3.0 header.

What maintenance or replacement will this 50cm cable need over time?

No scheduled maintenance is required; replace the cable only if the connectors become loose, pins bend, or signal integrity drops during sustained transfers.

What limit appears first when the cable runs at full 3.1 speed for long periods?

The 50cm length keeps signal loss low, so the first limit is typically the host controller's thermal throttling or the attached device's sustained write ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.