We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertical USB-C NVME SATA SSD enclosure with attached cables

LORDWORLD

LORDWORLD USB 3.0 Type-C to NVME M-Key M.2 SATA Enclosure RTL9210B

SKU CH-W1XR-QV9QQ

Connects M-key NVME or SATA SSDs in 2242, 2260 or 2280 sizes via USB 3.0 Type-C with RTL9210B chipset

  • Supports NVME M-Key and B+M SSDs for versatile upgrades
  • Fits 2242, 2260 and 2280 form factors without extra brackets
  • RTL9210B chipset enables USB 3.1 Gen1 and USB 3.0 up to 5Gbps
  • Reversible Type-C and Type-A cables simplify host connections
  • Vertical open design keeps drives cool during extended transfers

Portable NVMe and SATA SSD enclosure

This LORDWORLD enclosure connects an M.2 NVMe or SATA drive to a host over USB 3.0 Type-C. It accepts M-Key and B+M modules in 2242, 2260 and 2280 lengths. The RTL9210B controller handles the protocol translation. Drives are not included.

Passive cooling with dual-cable kit

The open PCBA layout relies on natural airflow and the drive’s own thermal profile. No fan or active cooling is present. A combined Type-C and Type-A cable is attached for broad host compatibility. Power draw follows the USB 3.0 bus limits.

Upgrades bare M.2 drives to external storage

It turns a spare internal module into a removable USB drive without a full enclosure shell. The jump is worth it when you need quick drive swaps or cross-system access at USB 3.0 speeds. It does not support PCIe AHCI drives, mSATA, WiFi cards or non-M.2 form factors.

Highlights

  • Supports NVME M-Key and B+M SSDs for versatile upgrades
  • Fits 2242, 2260 and 2280 form factors without extra brackets
  • RTL9210B chipset enables USB 3.1 Gen1 and USB 3.0 up to 5Gbps
  • Reversible Type-C and Type-A cables simplify host connections
  • Vertical open design keeps drives cool during extended transfers

Specifications

BrandLORDWORLD

Questions about this item

How do I install an M.2 2280 NVME SSD into this RTL9210B enclosure?

Slide the drive into the M-key slot at a slight angle, press it down flat, and secure it with the screw; the step people miss is confirming the drive is NVME PCIe and not SATA or AHCI, which this board will not recognise.

What maintenance or replacement will this enclosure need over time?

The RTL9210B bridge and the USB 3.0 Type-C cable are the only active parts; if transfer rates drop, try a different USB 3.1 Gen1 or USB 3.0 port before assuming the enclosure has failed.

What is the first speed limit I will hit during sustained transfers?

The USB 3.0 interface caps sustained throughput at 5 Gbps, so even an NVME drive rated for 10 Gbps will throttle to that ceiling during long copies.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.