We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminum mSATA enclosure with attached USB-A and USB-C connectors

LORDWORLD

LORDWORLD USB 3.0 Type-A & Type-C to mSATA SSD Enclosure Aluminum

SKU CH-FGMN-AYZB3

Enclosure for 30x50mm 68-pin mSATA SSDs with dual Type-A and Type-C connectors, USB 3.0 5Gbps speed, UASP and TRIM support, aluminium shell, bus-powered, plug-and-play on Windows 7/8/8.1/10/11.

  • Dual Type-A and Type-C connectors for versatile host connections
  • Up to 5 Gbps USB 3.0 speed with USB 2.0 backward compatibility
  • Supports 68-pin mSATA SSDs in 30x50 mm form factor
  • Aluminium alloy shell provides durable heat dissipation
  • UASP and TRIM support boosts SSD performance and lifespan

Dual USB Connector mSATA Enclosure

This aluminum enclosure connects a 68-pin mSATA SSD to a host via an attached Type-A or Type-C plug. It accepts standard 30x50 mm mSATA drives in SATA mode and is compatible with Windows 7 through 11, Linux and macOS. The bus-powered design needs no external supply and works without driver installation. Builders with M.2 or Mini-PCIe drives cannot use this adapter.

Thermals and Power

The aluminum alloy shell acts as a passive heatsink, dissipating drive heat during sustained transfers. Bus power draws all current from the host port, so no separate adapter is required and cable clutter stays minimal. Silent operation is assured because there are no moving parts.

Upgrade Path

The enclosure bridges legacy mSATA storage to modern USB 3.0 Type-A and Type-C ports at up to 5 Gbps, with backward compatibility to USB 2.0 at 480 Mbps. UASP and TRIM support help maintain SSD throughput and endurance. The jump is worthwhile when migrating data from an older laptop mSATA drive or repurposing a spare drive for portable backup.

Highlights

  • Dual Type-A and Type-C connectors for versatile host connections
  • Up to 5 Gbps USB 3.0 speed with USB 2.0 backward compatibility
  • Supports 68-pin mSATA SSDs in 30x50 mm form factor
  • Aluminium alloy shell provides durable heat dissipation
  • UASP and TRIM support boosts SSD performance and lifespan

Specifications

BrandLORDWORLD

Questions about this item

How do I install a 30x50mm 68pin mSATA SSD into this enclosure?

Slide the mSATA drive into the internal slot at an angle, press it down until it clicks into the 68pin connector, then secure it with the screw; the aluminium shell then slides shut over the drive.

Will the aluminium shell or the controller chipset need replacement after heavy use?

The aluminium shell is a passive heatsink with no moving parts and the controller supports UASP and Trim to extend SSD life; neither component is user-serviceable or expected to require replacement.

What speed limit appears first during sustained transfers on a USB 3.0 Gen1 port?

The USB 3.0 Gen1 5Gbps interface caps sustained throughput before the SATA 6Gbps link or the controller can become the bottleneck.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.